Application "Fire truck"

Fire - a formidable disaster that does not tolerate jokes, but the more relevant are the plots associated with fire fighting. It is very important to understand the features of the Fire Truck application and how to make it out of colored paper for children of 3 years old. It is worth figuring out how to make the details of a voluminous craft and what other ideas there might be.

Such a composition can be performed even by the efforts of children 3 years old. They are based on cardboard and paper. For work, you need to use scissors, and therefore one of the adults will have to constantly monitor the process. It is also very important to develop aesthetic taste and creative skills. It is worth considering that in some cases, rep or satin ribbons are used.

The stairs, the rectangles with the emergency number and the number of the specific fire department should be prepared in advance. Glue stick is better than PVA and even more paste. It is necessary to choose a good pencil, because not all of its samples are stable enough.

Sequence of steps:

• gluing corrugated cardboard to a white cardboard base in the manner of a frame;
• outlining templates - hydrants, bodies, windows and wheels;
• cutting out the received parts;
• gluing the hydrant to the tape, and the hose to the machine;
• adding symbolic information plates;
• fastening the ladder on top of the machine;
• fixing the hose in any position that will be necessary.

This option is a little more complicated. The main parts of an application fire engine can be matchboxes. The lower part of the structure is created from 4 boxes, which are placed in 2 rows.Another box should be placed on top in the middle part, reproducing an almost real booth. Then you have to:

• glue elements to each other, creating a rigid frame;
• paste over the composition with red paper;
• execute white windows;
• arrange the headlights in the form of yellow circles;
• assemble a fire escape from parallel set toothpicks and perpendicular matches;
• fasten the stairs to plasticine;
• cut out cardboard wheels (or take them from battered toy cars).

You can also make an applique using the method papercraft... This approach already requires the use of a thick paper sheet. On it you will have to draw and paint the U-turn of the car. The detail is cut with scissors.

You can also take a large box in the singular as a basis. Any rectangular packing carton will do. Additionally, self-adhesive polyethylene film or the same paper is used. The entire surface of the workpiece is pasted over with red materials. Next, you need to stick on additional details:

• doors;
• windows;
• wheels.

To make the fire engine more attractive, it is necessary to give the windshields and radiator grilles a similarity with the eyes and mouth, respectively. It is also very important to add a typical fire escape. It is done in the same way as in the previous case. You can designate special signals with pieces of foam board, plasticine or corrugated board. The wheels are made from discs and attached to the box with steel clamps.

A fire engine is sometimes made from semolina. This method perfectly develops fine motor skills. The composition is painted with gouache. Semolina is simply mixed with liquid dye. You can dry it on old paper (even wallpaper, newspapers will do).

When the drying is over, you need to draw the very emergency car on colored paper. To make this easier, stenciled strokes are required. Then the surface is covered with glue. It remains only to scatter the groats along the contour, and then from the perimeter to the center. You just have to wait until the end of drying, remove the excess cereal mass and - you can enjoy the result.

There is another application option. Start by finding a suitable drawing or model. They then need to be transferred to cardboard. All parts are cut sequentially, neatly. The blanks are outlined on colored paper and cut out.

Then:

• outlines are drawn on blue cardboard;
• stick the plots in accordance with the scheme;
• increase clarity by tracing in red or black marker;
• if desired, "clouds" are attached from above, which are obtained from pieces of cotton wool or cotton pads.

Whatever idea is embodied, it is imperative to lay an oilcloth, a large board or an old newspaper on the surface of the table. The main thing is that the protective material is not a pity to use in case of an accident. In the younger group, a fire engine is created using felt-tip pens, with which it is convenient to paint on complex details. At an older age, you can focus on specific car models. Their appearance is recreated using special photographs and drawings.

Together with the fire engine, it is reasonable to make other applications at once:

• a gallant firefighter;
• fire extinguisher;
• burning house;
• regular or burning wood;
• ambulance car;
• hoses;
• rescue helicopter.

First, in any case, the largest details are put on the background. Only then comes the turn of smaller parts. The Fire Truck application, like many other options, can be aimed at developing a variety of children's skills. In the younger group, children are introduced to various types of materials and their properties. They also need to instill the skill to arrange everything so that there are no errors and out-of-bounds.

In the middle group, it is already possible to work with foundations of an irregular shape. They also need to master the skills of working with angles and diagonals.Those attending the kindergarten preparatory group should already be ready to cut without first shaping the contours.

To learn how to make the "Fire Truck" application with your own hands, see the next video.