Wax depilation

How to remove wax from a wax melter?

How to remove wax from a wax melter?
Content
  1. Cleaning methods
  2. Funds overview
  3. Useful Tips

For waxing, the wax must first be melted, and this can be done using a special electrical device called a wax melter. The design of the device can be designed to melt can, film, lump wax, as well as to warm up special cartridges containing cosmetic wax. After turning on the device in the power grid, in just 30 minutes the wax will be heated to the required temperature and ready for use. It is noteworthy that all the while the waxing procedure continues, the wax will be maintained at a certain temperature thanks to the built-in heated platform.

In order for the appliance to serve for a long time and properly, it requires regular maintenance, which consists in cleaning the wax melter from wax contamination.

Cleaning methods

After the operation of the wax melter, its metal inner bowl, powered by the heater, must be thoroughly washed from the inside. Cleaning the wax melter bowl should be carried out regularly from film or lump wax, and if you have to warm up canned wax or cartridge wax, then you need to clean the wax melter from wax, which also gets on the body of the wax melter. Washing the wax melter is not an easy task, but it must be done immediately after using the apparatus. There are many components in the composition of cosmetic wax, and you will not be able to remove them with plain warm water or ordinary glycerin. Formulations made on the basis of fats or essential oils will help to effectively remove wax contamination. Chlorformin and turpentine can be called such substances - they wipe the walls of the bowl with a cloth soaked in one of the compositions.

But it is worth knowing that turpentine has a very pungent and persistent smell, which is an obstacle to its use.

Glass surfaces are much easier to remove wax than metal ones. Often the wax melter is covered with a non-stick layer inside, so it is impossible to scratch and rub the inside of the wax melter with abrasives. Cleaning is allowed only with the help of special products and a soft cotton cloth or paper napkin.

You can clean the wax melt with a removable metal bowl in the following way:

  • place the bowl of the wax melter in a container filled with water, into which a small amount of any detergent is added;
  • the container is placed on the stove, the soap composition is brought to a boil over low heat, in the process, the softened wax is separated from the walls of the bowl and floats to the surface of the solution;
  • soap dissolved in water will prevent the wax from sticking to the walls of the metal bowl again, therefore, immediately after the solution boils, the container is removed from the heat, the wax pieces that have risen to the surface of the water are allowed to cool and harden;
  • when the wax hardens, it is removed from the surface of the solution, and then the bowl is taken out of the water, wiped dry and set in place in the wax melt.

This method of cleaning is considered the simplest and most effective, since it does not involve mechanical action on the walls of the metal bowl.

If you need to clean the wax melter designed to warm up the cartridges, you cannot immerse the device in soapy water, since this type of device is not collapsible. The cartridges may be cracked or leaking and the wax will then coat the inside of the wax melter. In this case, you can clean the device in two simple ways. In the first option, it is enough to wipe it with napkins to collect spilled wax on them.

But hot steam will help to wash the walls of the wax melter more thoroughly. This will require:

  • put a container of water on the stove and bring it to a boil;
  • Turn the wax heater over and hold it over the steam until the wax on the walls melts and starts flowing down;
  • heated wax will need to be removed with napkins dipped in an alcohol solution.

When melting wax with steam, be careful not to burn your hands.

Such methods of cleaning an electrical device are affordable and economical, any woman can perform these simple steps and keep her wax heater in perfect condition, always ready to go.

Another effective option that can be used to clean the wax heater is the use of products designed to remove wax from the skin after the epilation procedure. These formulations effectively melt the wax and remove it from virtually any surface. But their cost is not cheap, so it is not always expedient to spend this tool on cleaning the device from an economic point of view.

A cheaper option is the oil and alcohol method.... Warm wax melt must first be wiped with a cloth soaked in vegetable oil. Even ordinary refined sunflower oil is suitable for this purpose. After the wax remains on the cloth soaked in oil, the remaining fat from the walls of the device must be removed with a napkin soaked in 40% alcohol solution - ordinary vodka is perfect for this purpose.

Funds overview

Another cleaner can be used to remove wax contaminants from the wax melter. For example, the Depileve brand produces a special formulation that can be used for cleansing. If you do not have such a remedy, then wipes soaked in a special lotion to remove the remnants of the sticky layer on the skin after epilation can be used. Quite often, such wipes are included in kits for home depilation or epilation; they can be bought at specialized retail outlets that sell wax and other materials for cosmetologists.

Such products quickly and easily allow you to clean up dirt, they do not require much physical effort and time-consuming.

In addition to the listed options that can be used to tidy up the wax melter, there are other means that perfectly remove wax stains.

  • Alcohol-soaked wipes. In the pharmacy chain, you can buy wipes moistened with 90% alcohol in advance. This concentration contributes to the rapid elimination of wax from any surface - metal, plastic, glass. The active substance in this case is isopropyl alcohol, which quickly and efficiently dissolves the components of the wax.
  • Lotion for cleansing the skin. There are liquid products that cleanse the skin after a wax procedure. The lotion not only cleanses the skin, but also nourishes it due to its composition, which contains fatty components. If you moisten a piece of cotton cloth with this lotion, the walls of the wax melter can be easily and quickly cleaned of wax contamination.
  • Vegetable oil. We have already spoken briefly about this ingredient, we will dwell on it in more detail. For the purpose of cleansing the apparatus that warms up the wax, you can use any oil - olive, sunflower, linseed, massage. In some cases, vegetable oil can be replaced with a fatty cream. Using these tools is quite simple. First, oil or cream is applied to the walls of a warm wax heater and the fatty components are allowed 5-10 minutes to dissolve the wax. Then they take a dry cotton cloth or napkins, press it against the wall of the wax melter and wipe off the wax - it will remain on the fabric. Then the fabric is moistened with a soapy water solution and the walls are wiped again to remove the remaining fat.

The considered methods of wax removal are effective only if they are used on a warm wax melt. On cold surfaces, they may be ineffective or require a lot of cleaning agents.

Useful Tips

To remove the remaining wax after depilation from the body of the wax unit, when the procedure was carried out at home, you can use a mechanical method. Hardened wax is removed with the back of a knife blade or with a wooden spatula. A wax drop that has frozen on the surface will need to be gently pryed off - as a rule, then it itself lags well behind the plastic case of the device. Then the surface of the wax heater is wiped with a cloth soaked in soapy water, then the electrical device is wiped dry. But this method is rarely used, since there is a risk of scratching the wax melt or ruining it. In addition, the mechanical cleaning method will require painstaking work that takes a lot of time and effort. It is not recommended to clean the inner surface of the wax melter bowl in this way, so as not to damage the non-stick coating.

It is much easier to tidy up the equipment after a home procedure using more gentle methods. It should be remembered that wax leaves the hottest wax melter the quickest and easiest way, but there is a risk of burning your hands.

In the process of cleaning the wax heater from wax contamination, the user must remember that this device operates from an electric power supply, therefore, it is necessary to carefully monitor that water does not get inside the case or is not in the contact area. Before reconnecting the device to the network, make sure that the wire itself, the contact of the connection to the device and the plug are absolutely dry. This will prevent a short circuit from occurring, and save you from electric shock. In addition, do not wipe with a damp cloth when it is plugged into an electrical outlet. All manipulations for cleaning the wax melter can be performed only when it is disconnected from the power supply.

For information on how to clean the wax melt from wax, see the next video.

4 comments

Thank you for the video!

In my real life, everything is not so easy and simple as in the video. What have I not tried ...

Catherine 24.03.2021 21:38

Thanks, it helped a lot.

Anastasia 12.08.2021 19:57

The nail polish remover perfectly cleans wax melters.

Fashion

the beauty

House