Sliding bins under the sink
![Sliding bins under the sink](https://fashion.decorexpro.com/images/article/croppedtop/450-255/2019/05/vydvizhnye-musornye-vedra-pod-mojku.jpg)
A modern kitchen needs appropriate content. In it, you definitely need to think over a place for collecting waste. For this, there are specially designed containers - buckets, containers and even whole systems for collecting garbage. Since these items do not always look neat and hygienic, it is more reasonable to place them in a cabinet under the sink, and it is especially convenient to use pull-out models.
Accommodation features
This situation is not accidental. Most of the garbage accumulates in the sink, because there many products are cleaned not only of dirt, but also unnecessary parts. In addition, in accordance with the rules of the kitchen device, there is usually a work surface next to the sink - all the main manipulations are performed on it, as a result of which a lot of waste remains.
To keep kitchen surfaces tidy, you must have a trash can at hand. The proximity of its location is explained by the convenience and economy of time and effort.
![](https://fashion.decorexpro.com/images/article/cropped/337-337/2019/05/vydvizhnye-musornye-vedra-pod-mojku-1.jpg)
![](https://fashion.decorexpro.com/images/article/cropped/337-337/2019/05/vydvizhnye-musornye-vedra-pod-mojku-2.jpg)
A good trash can must meet a number of requirements:
- strength and durability;
- spaciousness;
- convenience;
- hygiene.
A properly sized waste bin should be as easy to clean as possible and prevent the spread of odors. In addition, when using an ordinary trash bin, you often have to take it out, move it to open the lid - this can get dirty not only your hands, but also the surrounding objects.
To facilitate this process, conventional buckets have been improved. Various pull-out models fully meet all of the above requirements.
![](https://fashion.decorexpro.com/images/article/cropped/337-337/2019/05/vydvizhnye-musornye-vedra-pod-mojku-3.jpg)
![](https://fashion.decorexpro.com/images/article/cropped/337-337/2019/05/vydvizhnye-musornye-vedra-pod-mojku-4.jpg)
Views
Almost all models of built-in bins consist of three parts:
- external body (frame, base);
- removable inner containers;
- cover.
The body and lid can be side-mounted to the bottom, cabinet wall or front. The differences in fastening determine the ease of use.
- There are automatic models that slide out when you open the facade. This leaves the cover in place. On the reverse movement, the bucket snaps into place and closes. Moreover, you can store things on such a cover. This is the most convenient and hygienic option, since the bucket and lid do not need to be touched by your hands, get dirty and expend energy on it.
- There are also semi-automatic models, the body of which moves (on wheels or using guides). But the lids of the containers will have to be opened manually. In the simplest version, you will even have to push the bucket manually.
![](https://fashion.decorexpro.com/images/article/cropped/337-337/2019/05/vydvizhnye-musornye-vedra-pod-mojku-5.jpg)
![](https://fashion.decorexpro.com/images/article/cropped/337-337/2019/05/vydvizhnye-musornye-vedra-pod-mojku-6.jpg)
Built-in bins can be either plastic or metal.
- Plastic. Such products are lightweight and easy to handle. Plastic washes well, but contact with corrosive chemicals is undesirable. In addition, excessive loading, impact or careless handling can damage such a bucket. Plastic models can be colored, and other material options provide variety in design.
- Metallic. Since the waste is different, stainless steel is the most commonly used. This bucket will be strong and durable. Matte metal surfaces are more practical, dirt is not so visible on them, and it is easier to care for them than for shiny ones. Stainless steel accessories are usually chosen for filling kitchens in one of the modern styles. Metal of dubious quality is quite capricious - corrosion may appear on it due to contact with water, liquid and semi-liquid waste.
![](https://fashion.decorexpro.com/images/article/cropped/337-337/2019/05/vydvizhnye-musornye-vedra-pod-mojku-7.jpg)
![](https://fashion.decorexpro.com/images/article/cropped/337-337/2019/05/vydvizhnye-musornye-vedra-pod-mojku-8.jpg)
Simple garbage bin models are often made entirely of one material. But metal waste systems are almost always diluted with plastic parts. There are a couple of reasons for this.
- Practicality. Internal plastic containers make the structure much lighter and easier to clean. In addition, the plastic can keep the metal cover from banging against the case.
- Combined models are much cheaper than metal ones. And so that the appearance does not suffer, all external surfaces can be made to look like stainless steel.
But more attention should be paid to the mountings and the withdrawable mechanism. Here, there should be as little plastic as possible - fragile parts often break and require additional expenses for repairs. In addition, poor fixings can cause irreparable damage to kitchen furniture.
![](https://fashion.decorexpro.com/images/article/thumb/715-0/2019/05/vydvizhnye-musornye-vedra-pod-mojku.jpeg)
Popular models
The variety of built-in kitchen buckets is great. Therefore, for clarity, you can highlight and consider several models with the largest number of reviews.
- Hailo Solo (from 400 mm) - German waste bin made of plastic and steel. Modern model with a capacity of 20 liters, attached to the frame and facade. The container is convenient because it slides out completely. The lid is stationary, it remains in the cabinet, you can place household items on it. This manufacturer has a similar model Hailo Big Box, similar in its characteristics and cost. Differences in shape: in the first model it is square, and in the second it is round. The lid of a round bucket causes complaints - over time, it fits less tightly to the bucket and can let in an unpleasant odor. But here the advantage is the stylish metal case.
- Ekotech Unika (600 mm) - a plastic waste bin with two compartments of 15 liters and a reliable metal frame. Quite roomy, suitable for a family. The second compartment can be used for storage. The Italian manufacturer gives a 2-year warranty, according to reviews, this model can withstand heavy loads and is easy to use. The containers slide out smoothly and without knocking. It can even be installed instead of a tall drawer, or on a regular facade. But the lids need to be opened and closed manually.
- GTV Forza (from 450 mm) - Fastened to the side of the cabinet, automatic full extension.A capacious system for collecting and sorting waste - 32 liters (2 x 16 liters). There is a special tray for storing household chemicals, which acts as a lid. The entire structure can be easily removed for cleaning. Has metal mounts and a plastic case. Country of origin - Poland.
![](https://fashion.decorexpro.com/images/article/cropped/162-162/2019/05/vydvizhnye-musornye-vedra-pod-mojku-9.jpg)
![](https://fashion.decorexpro.com/images/article/cropped/162-162/2019/05/vydvizhnye-musornye-vedra-pod-mojku-10.jpg)
![](https://fashion.decorexpro.com/images/article/cropped/162-162/2019/05/vydvizhnye-musornye-vedra-pod-mojku-11.jpg)
![](https://fashion.decorexpro.com/images/article/cropped/162-162/2019/05/vydvizhnye-musornye-vedra-pod-mojku-12.jpg)
How to choose?
Consider the nuances selection of a retractable bin under the sink.
- First you need to decide on the volume. Most often it is calculated depending on the number of people living. The smaller the volume, the more often the content will have to be taken out.
- Not all models of built-in buckets can be installed under the sink. This is especially true for outgoing bulky systems. Their placement and functioning can be impeded by a siphon, pipes and other features of the location of communications. It is better to select all options for kitchen equipment before the start of repair work, coordinating actions with a good specialist.
- The most compact buckets are square and rectangular. However, in terms of internal filling capacity, traditional ones are better - round. Any option you like will fit into the spacious sink section. The model must be selected more carefully in a narrow or cluttered cabinet with pipes. For the most compact, 30 cm is enough. For medium-sized buckets, 40-60 cm are needed.
- The place where waste accumulates should be washed frequently. Shiny metal parts require special treatment, as they require special care products. Any contamination - even the most harmless (for example, dried drops) will be less visible on plastic surfaces, and it is easier to wash them. Some models completely block access to the cabinet under the sink, making cleaning difficult.
- When buying, it is important to evaluate all the little things, from the ease of pulling out to the tight fit of the lid. To avoid possible disappointment, it is better to study reviews on the Internet for models of interest or similar to them. In addition, it is necessary to check the package contents and the availability of instructions in Russian.
- When choosing a color, they are often guided by the color of the frame of the kitchen furniture or its facades. And also in the same style, you can pick up accessories (for example, under the metal). The most popular in this regard are plastic models in neutral colors - white and gray.
- Waste sorting systems with several compartments inside for different types of waste deserve special attention. These models are relevant where people care about the environment, and their benefits are obvious. In addition, such containers can be used to store vegetables, household chemicals and more. However, installing one universal container is less hassle.
![](https://fashion.decorexpro.com/images/article/thumb/715-0/2019/05/vydvizhnye-musornye-vedra-pod-mojku-13.jpg)
See below for how to install the retractable bin.