Shower enclosures with a high tray: varieties, brands, selection

Recently, people have been installing showers in their bathrooms instead of regular baths. They are comfortable, easy to operate, and easy to maintain. But among the cabins, shower enclosures occupy a special place, which will be discussed today.

The shower enclosure has both advantages and disadvantages compared to classic shower enclosures.

Let's start with the pros.

1. Easy installation. Since the main function of the "corner" is only to take a shower, the installation also involves a simple device that will allow you to take water procedures. All you have to do is install the structure and adjust the mixer.
2. Price. Since the shower enclosure does not have many additional functions, the cost of such a design will be clearly lower. There are not many designer interiors for the corner, so you will pay for the device itself, and not for decorative delights.
3. Compactness. First of all, when choosing a "corner" or a cabin, buyers are guided by the size, because if the bathroom is small, then you need to purchase a compact device for it. Among the corners, you can find models with dimensions of 70x70 or 80x80 cm, which will be in the shape of a quarter of a circle.
4. Diversity... This item cannot be attributed to obvious advantages as a difference from cabins, but it is the large number of installation options that helps people choose the design that will suit them as much as possible. You can find shower enclosures with a high base in various materials and shapes, or even without a bottom structure.
5. Reliability... Due to the fact that the corner has no special functions and modes, the probability of breakage is much less.The main malfunctions of the owners of cabins arise from electronics, which ensures the operation of special modes. The less "stuffing", the less chance of breakage. This is what shower enclosures are good for.
6. Economy. Due to the presence of only one function, corner models consume much less electricity.

But there are also some downsides.

1. Unattractive appearance. Cabins from the middle price segment differ in their design. The corner cannot boast of this, so before buying, decide whether you need a simple device. If you want, in addition to functionality, to have a design with a special look, then in this regard, the cabins will be better.
2. Monotony... As mentioned earlier, the corner was created only to wash. It has no other functions. For some, this is a significant disadvantage, but for others, the only function is the main one.
3. Interior. The corners are best set after a recent renovation, as there may be problems with the position of the siphon. Of course, the shape and installation of this part depends individually on the model and manufacturer, but it is better to keep in mind that this unpleasant part can harm the overall interior of the bathroom.

First of all, we will consider the materials of both the structure itself and the pallets.

The structure is usually made of aluminum or plastic.

1. Aluminum. This metal is the base material for most corners. It is good because it is lightweight, has resistance to rust, and is quite durable. Aluminum is most often found in models of the middle and high price segment.
2. Plastic. This raw material is used for low price models. As a rule, plastic is processed with special materials. It can be various chrome alloys or ordinary paint. This material is bad in that it is less durable and tends to leak. If you buy such a corner and it won't leak, then you have a good model or a great manufacturer.

The pallet material is very diverse.

• Acrylic. The basic material for all types of plumbing and bathroom furniture. Acrylic is resistant to scratches, rust, dirt and other formations. These pallets can be of different shape and thickness. Installation of acrylic bases is carried out using fasteners. Thick pallets made of this material can be compared in strength to steel ones, but they retain heat much longer, do not make an unpleasant sound when water gets in, and do not need to be grounded.

• Cast iron / steel. Metals that are known for their reliability and durability. The main disadvantage of cast iron is its heavy weight, while for steel the main disadvantage is considered to be the loud noise emitted and the requirement for grounding. It is also worth mentioning that both metals do not retain heat well.

• Kvaril. One of the best materials due to the fact that it is durable, lightweight and at the same time unpretentious. And also one of the advantages is high thermal conductivity and excellent sound insulation. For all these advantages, of course, you need to pay well. Of the minuses, special operation can be noted, because it is advisable not to heat the cooker to high temperatures and not to use aggressive cleaning agents to clean it. The price is naturally high due to the large number of advantages over other materials.

• Ceramics. A very popular material for plumbing. It is inexpensive, has excellent sound insulation and thermal conductivity. And also among the advantages can be noted a large number of design options and easy operation. There are also disadvantages, including high weight and fragility. Since the structure is heavy, it will be stable, but the installation of such a pallet is difficult, given the fact that a flat surface is needed for the installation of such platforms. Brittleness allows the material to crack easily even with minor damage.

• Stone (natural / artificial). A very beautiful material for which designers create many appearance options.Since the stone has a natural structure, it does not emit unpleasant sounds. The construction of this material is strong, reliable, but also heavy. The main disadvantage is the price, as it is very high.

• Tree. Quite reliable material that requires special care. It must be treated with antiseptics, varnishes and moisture-proof impregnations. The advantage is lightness, a huge number of design options and good thermal conductivity. And also the tree does not make sounds when water gets in. The disadvantage can be called the service life, since the tree in any case will begin to get wet after some time of use. Average price.

As mentioned earlier, the corners are better than the cabs in that they have a wider variety of sizes.

• Small: 90x90 cm, 80x80 cm, 70x80 cm, 70x90 cm, 80x90 cm and others.
• Average: 100x100 cm, 100x80 cm, 70x100 cm, 80x100 cm and 110x80 cm.
• Large: reach at least one indicator 120 cm. For example, 120x80 cm, 120x90 cm, 80x120 cm and others.

In addition to dimensions, the corner shower is varied in the form of doors, which are of three types.

1. Sliding... The most popular type of shower enclosure door. The main advantage of this type is its compactness. The basis of the design is made up of rollers that are attached at the top and bottom of the frame. The mechanism can be compared to a wardrobe. The sash is opened to the side. Thus, the door, as it were, runs into the frame with an additional layer. At the same time, the buyer does not have to worry about the space that will be occupied by the corner with the open door. The downside is the tricky installation.
2. Swing. This type of door opening is familiar to most people. The door wall opens outward, like the simplest front door. Installation of a swing type is simple, because only hinges will be needed for installation. The downside is the space occupied by the open door. Since they will be located, as it were, outside the corner, then before buying, make sure that the area of ​​the bathroom allows you to use such mechanisms without any problems.
3. Sliding. They work on the same principle as sliding doors, but the whole door will not be outside, but inside. And also it can be outweighed in order to open the door in the other direction. That is, if your sliding door opens to the left, then after overweight it will slide to the right. The structure is also supported on casters.

The best companies are manufacturers from Germany, Italy and Finland. It is the brands from these countries that have extensive experience in the creation of sanitary ware and bathroom devices.

TIMO Is a Finnish manufacturer known all over the world. The main line of shower enclosures is called Fabric Glass. The main dimensions are 100x100 and 80x80 cm.

There is no reason to doubt the quality of the products of this company, because it is a carrier of European quality. And also the TIMO assortment always participates in many world exhibitions.

AM. PM - a brand from Germany, which in a fairly short period of time was able to become popular among buyers. The history of the company began in 2010. In a fairly short period of time, AM. RM has become one of the samples of European quality. The products of this company participate in many exhibitions and presentations. And also AM. RM is trying to expand its consumer network by opening more and more stores and representative offices.

This manufacturer also creates toilets, faucets and other plumbing fixtures. The main lines of shower systems are called Twin Slide and Square Slide.

Cezares is an Italian company that creates premium quality products. Among the assortment of this brand you can find shower systems, faucets, dressers, sinks, toilets and much more. A feature of Cezares is that all products are created only in Italy, while some European brands make sanitary ware in other countries, only coordinating sales processes in Europe.

When buying, you should be guided by the size of your bathroom. As stated earlier, even parts such as doors can influence the choice.

Another important element is the platform. With a deep base, the corner is less likely to leak. But a high pallet needs to be looked after more carefully.

It is worth mentioning about the shape of the pallet - it can be semicircular, in the form of a quarter circle, rectangular or square.

At the time of purchase also pay attention to the package bundle... Although it is not as rich in the corners as in the cabins, this aspect is still very important.

In addition to the configuration and size, there is an important factor in the form of price. If you want to buy a really high-quality product, then you shouldn't spare money. Still, the corner is not a cabin where you have to pay extra for additional operating modes, hydromassage and much more.

Looking at the types of pallets, we learned that some materials require special care. Since the entire structure of the corner must be wiped off so that no drops of water remain on it, then use non-aggressive detergents. A poorly chosen agent can corrode the protective surface of the material, thereby reducing its service life and exposing it to breakage.

Wipe the corner with a rag and agent to keep the inside of the structure clean.

Some corner models have matte doors... They are well suited for those rooms where a certain color is observed. Devices with two walls are best placed against tiled walls. Thus, the design will not lose its aesthetics. Transparent doors and walls can visually expand the space. A good solution would be to choose a pallet of the same color as the tiles in the bathroom, so that the corner looks harmonious in the interior of the room.

Glasses available for sale with a lot of patterns and colors, therefore, you should not have any problems with the design of the colors.

For tips on choosing a corner, see below.