Electric scooters Halten: description of models and operating instructions

Electric scooters have become a common means of transportation for Russian users. But even against the general background, the models from Halten stand out favorably in comparison with the products of competitors. Let's see what this technique is, for what reason it is singled out especially.

It is pertinent to start a review of devices of this brand from the Lite model. The scooter's power is 350 watts, it can travel 25 km in 1 hour on a single charge. However, after that the device will need to be sent for recharging. The lithium-ion battery has a capacity of 6.4 Ah. It is rated for 36V and can be temporarily removed.

The total weight of the Lite model reaches 12.5 kg. The scooter will ride on wheels with a diameter of 10 inches. The maximum load when driving can reach 120 kg, which makes it possible to consider the model as an adult electric scooter. It is curious that three brakes are put on it at once:

• front with recuperation mode;
• rear disc type;
• rear foot type.

Pleasant emotions can be delivered and model RS-01. This device achieves a power of 0.5 kW, and its battery absorbs 15 ampere-hours of electricity. The speed can reach 35-40 km / h, depending on the complexity of the road to be overcome. The operating voltage is 48 V. The total weight of the device is 16 kg.

It travels 35 km on one charge. The wheel section is 8 inches, and it takes 5 to 7 hours to recharge the battery from scratch. Maximum load mass - 120 kg. When packaged, this scooter measures 113x24x43.5 cm.

The scope of delivery contains:

• multitool;
• charger;
• instructions for use;
• warranty service coupon.

The RS-01 has mechanical disc brakes located at the rear. The frame is made of steel and aluminum. The brand warranty is given for 3 years. Users can use the liquid crystal panel for control. The braking arm with a diameter of 2.2 cm is made with a servo drive.

The manufacturer declares that all synthetic parts of the device are made of extra strong and environmentally friendly plastic. The weight of the scooter including packaging is 19 kg. After the layout, its dimensions will be 110x15.5x115 cm.When the scooter is folded, it takes up 113x15.5x40 cm.

The next model in demand is the RS-02... This electric scooter is already designed for a power of 1.2 kW, and its battery can provide 24 ampere-hours of current. The device can travel 60 km on a full battery charge. At the same time, it will develop a speed of up to 50 km / h. As with the previous model, signaling is provided by means of an LED headlight.

Other characteristics are as follows:

• net weight 27 kg;
• section of wheels 10 inches;
• charging time from 240 to 300 minutes;
• loading weight up to 150 kg;
• packed size 127.3x27.3x51.5 cm;
• all settings are set immediately during the jewelry making process.

The RS-03 model also deserves attention. This technique is designed for a power of 2.4 kW, and its battery delivers a current of 24 ampere-hours. The maximum travel distance is 60 km, while the scooter can reach speeds of up to 65 km / h. The total weight of the vehicle is 36 kg and the diameter of its wheels is 11 inches. It will take 8-10 hours to charge the battery, the total load on the scooter can be 150 kg.

Both brakes (front and rear) are hydraulic disc brakes. The scooter frame is made of aluminum. Full customization is carried out at the factory. The braking arm is made according to the servo-brake scheme. Its diameter is 2.2 cm.

When it comes to finding a Halten electric scooter, maximum attention should be paid to the shock absorbers used. After all, ride comfort ultimately depends on them. And in a sense, its safety - after all, when the transport is constantly "jumping" on any pothole, on any bump, it is easy to get distracted from management and make a mistake. The next important parameter is the size of the wheels. The larger they are, the more serious obstacles can be overcome on the road.

For ordinary people who are not going to engage in racing and extreme trips to nature, wheels with a diameter of 10 inches will be enough. You also need to pay attention to the carrying handle. In its absence, the life of the scooter owner will become somewhat more complicated.

The steel frame is quite sturdy and can withstand very heavy loads. But if the mass of the device is critical, you need to choose modifications from aluminum. This circumstance is especially important when using technology by adolescents and children. And also it is necessary to pay attention to the battery capacity, top speed and power reserve (these indicators are obviously interconnected). Finally, it is worth evaluating both the external qualities of the scooter and its convenience for oneself. It will be very good if the seller allows you to make a couple of laps.

As with any technique, the instructions should be read carefully. Once the battery is fully charged, you can immediately hit the road. While driving, you must firmly hold the steering wheel with both hands. They put one foot on the electric scooter, and the other makes several jolts to accelerate. To brake, press on a special lever.

Let's look at the instructions for use using the Halten RS-03 model as an example. In other cases, if it differs, then it is insignificant. The manufacturer's official instructions state that the declared travel range on a single battery charge is achieved only when the scooter is loaded with no more than 70 kg.Another condition is a sufficiently flat and well-equipped road. The third condition is that the speed should not be higher than the average level. At maximum acceleration, the ride will turn out to be a little less, especially if the rider is rather heavy.

Fold the electric scooter like this:

• fold back the latch;
• carefully pull it out;
• in a fully extended position, attach the latch to the extreme screw;
• press the locking button (at the same time pulling down the steering column);
• add up this column.

For layout:

• discard the latch;
• lift and attach it to the extreme screw;
• press the locking button with your hand;
• raise the steering column, waiting for a click.

You can turn the power on or off by pressing the ON / OFF button. Important: this button should be held for 3 to 5 seconds. Pressing the throttle trigger will accelerate, and releasing it will slow the scooter down. It is categorically impossible to accelerate beyond measure, because it threatens an emergency. The MODE button helps to adjust the travel speed.

With its help, one of three modes is set (in order of increasing speed):

• SLO;
• MID;
• FAS.

Inspect not only tires, but all fasteners. They also check the battery charge, the fixation of the steering rod, and the tightening of the bolts.

For learning to ride, it is advised to choose vacant lots with a flat surface. In addition, rarely visited park paths, parking lots and paved courtyards are suitable.

For an overview of the Halten rs-03 2400w, a very powerful all-wheel drive electric scooter, see the next video.