Ironing and steaming

How to iron tulle?

How to iron tulle?
Content
  1. Recommendations
  2. How to wash so as not to iron?
  3. Material

Household chores are time consuming. And sometimes it also happens that an elementary task causes additional difficulties, for example, ironing tulle. This material is very subtle and requires a special approach.

Recommendations

Although each type of fabric has its own specific ironing conditions, there are some that must be considered regardless of the type and density of the tulle.

If a finished product was purchased, then the temperature regime and conditions for caring for the product must be indicated on the label. You should carefully study them and adhere to all points.

Before connecting the iron to the network, you need to check the condition of the sole - it must be clean. Black spots are burnt particles. If you start ironing with such an iron, then they will ruin the thin fabric: black prints may appear on it, or the iron will burn it altogether.

It is necessary to determine what fiber the tulle is made of - it can be synthetics, silk, cotton, polyester and other materials. Most irons have a special program for each type of fabric - this is what you should choose. If the temperature regime is set manually, then you need to select a value not higher than 120 degrees.

Do not rush or, conversely, linger for a long time in one area (keep the iron stationary) - this will lead to the fact that the canvas will be ironed unevenly. You should choose your own pace and stick to it.

Like any other fabric, the tulle must be ironed from the wrong side. To prevent damage to the fabric, a damp gauze should be used as a spacer between the iron and the tulle. If a special pad is included with the iron, then you must definitely attach it to the sole, because it is used precisely for these purposes.

The ideal ironing option is the vertical position. For example, the fabric will straighten under its own weight. Additionally, you can act on it with an iron or a steam generator.

Despite the advice of manufacturers to iron only completely dry fabrics, this approach does not always give the desired results. Therefore, you should not wait for it to dry completely. Kinks caused by drying will be difficult to smooth out even with a jet of steam.

The seams are ironed exclusively from the wrong side. In this case, it is necessary to ensure that the pressure is not strong. In this case, seam marks may appear on the front side.

To prevent this undesirable effect, iron with a damp, thin cloth (gauze).

How to wash so as not to iron?

In some cases, you can do without ironing at all. This is very convenient as it saves time and effort. But the washing machine will not be an assistant here.

This method works well with fairly heavy fabrics (cotton, silk) and veils. It will be almost impossible to achieve the absence of folds on organza, since this material is very moody.

Below is a step-by-step process for washing and hanging the tulle.

  • Pour water into a large basin, dissolve detergent (or detergent used for washing) in it. If there is no large capacity, then the bath itself will do. There should be no small grains of powder left, as they can settle on the fabric.
  • Then you need to soak the tulle for a few minutes and wash immediately. It is unacceptable for it to lie for a long time, as creases can form. It will be impossible to smooth them out in a natural way.
  • After that, you need to drain the soapy water or drain it if the wash was carried out in the bathroom. Then rinse the fabric well. You do not need to wring it out. You can wait a little until the water drains naturally.
  • It is advisable to immediately hang it on the cornice. Since it will still be quite wet, there may be small puddles on the floor. To prevent this, you need to put underneath floor rags or other unnecessary fabric, for example, old sheets, diapers.
  • The next step will be to distribute the tulle along the entire length of the eaves - you need to ensure that the sections of the fabric do not stick to each other. In this position, it should dry fairly quickly and without wrinkles.
  • If they are nevertheless formed in a small amount, then you can steam them without removing them with a steamer or an iron with this function - this is very convenient, especially when the curtains are long and large.

Material

Organza

This fabric attracts many housewives with its beauty. Translucent and light, it creates a feeling of weightlessness and lightness of space. But taking care of her is not easy at all.

Below are the rules that will make ironing this "capricious" material much easier.

  1. The last step in the wash should be a rinse in lightly salted water. This will require about 1 tbsp. l. with a slide for 5 liters of water. This avoids the iron sticking to the thin fabric.
  2. Organza has a special kind of weave fabric. In order not to damage it, it is necessary to iron at minimum temperatures and through tissue paper.
  3. Do not dry the material folded in half - it will be very difficult to smooth out such creases.
  4. The ideal way to remove creases is to use a steamer. For example, you can hang a not yet completely dried fabric on a cornice and smooth it with the power of this device.
  5. Organza producers say that it should only be steamed dry. If this is not done, glimmers may form on the fabric, and it will lose its attractive appearance.

Cotton

One of the important conditions for successful ironing is the correct choice of the spinning mode of the fabric in the machine - it should be performed at minimum speed.

Better to let the fabric be a little damp than dry well, and creases will form on it.

As mentioned above, such a fabric can simply be hung directly on the window. She straightens well under her own weight. This is very convenient, especially if the canvas is large. If this method is not suitable for cotton curtains, then you can use an ordinary iron. In this case, the temperature should not exceed 100 degrees.

You need to lay the fabric with its front side on the board, put a damp gauze net on top - this is the only way to be sure that the iron will not burn through the thin curtain. But if there is a special nozzle for the sole of the iron, then you can do without gauze.

From nylon

This type of fabric is made of artificial fiber.

In order not to damage it, it is necessary to take into account some of the recommendations of experienced housewives.

  1. Do not use a spray bottle to wet areas of the canvas - after drying, the drops may leave stains.
  2. You need to iron the nylon until it becomes dry. Step-by-step instructions on how to do this are described above.
  3. If a person is ironing this fabric for the first time, then first you need to arrange a test for it. To do this, you should choose a gentle mode and walk with a hot iron from the very edge. If everything is in order, and there are no undesirable consequences of such an aggressive effect on it, then you can continue ironing the entire canvas.
  4. Ironing is allowed only when using a special protective iron attachment or damp gauze (you can also use another thin cloth).
  5. A subtype of fabric such as viscose is ironed exclusively from the seamy side.

Ironing the tulle can be a pleasant and safe fabric procedure if you follow the simple guidelines. By listening to the advice described above, you can preserve the pristine beauty and quality of the material for a long time.

For how to iron tulle, see the next video.

no comments

Fashion

the beauty

House