Dry cleaning

All about tornadoes

All about tornadoes
Content
  1. What it is?
  2. Device and principle of operation
  3. Models and brands
  4. Which compressor to choose for a tornado?
  5. What products should I use for dry cleaning?
  6. How to use?
  7. Review overview

Automotive dry cleaning today has a lot of devices. One of these is a device called a tornador. It is a very unique tool that is great for working at home, which saves money and time.

What it is?

Tornador is the best device that allows you to get rid of dirt on any surface, which was invented by Japanese and American specialists. This device is designed to remove dirt from hard-to-reach places. Basically, the tornador is used to clean elements of the car interior, made of plastic, leather or textiles. It is noted that it is economical in the consumption of the cleaning agent, because the tornador gradually sprays it onto the surface, leaving it clean and dry.

In everyday life, such a device is used in cleaning sofas, carpets and other things. Sometimes it is also used to clean glass, discs or even the engine compartment of a car.

Device and principle of operation

So, a tornador consists of the following details:

  • gun;

  • tank.

The pistol is divided into several more parts:

  • funnel;

  • hose;

  • rotating mechanism;

  • reversing crane;

  • a pen.

Plus, a compressor is added to all this. It is a separate unit that is usually purchased separately. It connects to the gun using a special hose with a control valve.

The tornador works by cleaning surfaces with compressed air, which is blown out of the vehicle using a compressor. The device has a kind of nozzle on the pistol - a funnel, inside which there is a small tube with a nozzle. It spins at high speed when the tornado is operating using a special mechanism.

The tube inside the funnel is for the supply of the cleaning agent. The high speed of its twisting allows the tornado not to water the dirty place with chemistry, but to spray it, due to which its efficiency becomes several times higher.

When the appliance is brought close to a dirty surface, the air stream blown out at high speed knocks out dust and dirt. Thanks to the rotating mechanism, a kind of "tornado" effect is formed - and all the dirt does not fly to the sides, but accumulates on the inside of the funnel.

Thanks to the chemical agent, the surface cleaning quality becomes the best. The device perfectly sprays chemicals, after which the cleaning site remains practically dry.

Since the funnel collects all dust, it should be cleaned frequently. To remove all impurities from it, you must place it in a container with water, and turn on the air supply for a few seconds.

As soon as the dry cleaning is over, the tornador must be taken apart. Each part must be washed and the bearings of the rotating mechanism must be lubricated.

Models and brands

Koch Chemie Is the largest tornador brand. The company has a huge assortment of models, among which everyone can choose something for themselves, but the most popular is the Cyclone model. Types Z-020 and Z-010 are the most common. It is important to understand their features before purchasing.

Model Z-020 has a mechanism that rotates at a speed of 4200 rpm, and it is made of metal. It also has a bearing. Its competitor has a movement that spins at just 3600 rpm. It is made of plastic. It has no bearing.

Unlike Z-010 the first model has a lever that can regulate the supply of pressure. Their service life is also strikingly different. If the Z-020 according to the passport serves for more than a year, then the Z-010 may break after 3 months of use. The air consumption of the first is higher, and due to the fact that the air supply can be regulated, it ranges from 100 to 270 liters per minute. The competitor has a constant value of 120 liters per minute.

Having studied the characteristics of 2 types of tornadoes, we can come to the conclusion that Cyclone Z-020 has better quality than its competitor, however, it will cost much more. Therefore, the first model is better suited for professional purposes, and Cyclone Z-010 - for household purposes.

In addition to the above two models, there are their analogues and modifications, which are produced not only by Koch Chemie, but also by other companies.

Cyclone AZ020K

One of the models used in the industry for professional dry cleaning. Koch Chemie manufactures the device, similar to the Z-020 model, but differing in that it has an increased speed of the mechanism and a shorter funnel.

Tornado С-20

This device is an analogue of the AZ020K model. Its revs are less and are about 6000 rpm. It is produced by the Tornado company. It can be used for both wet cleaning and dry cleaning - this is its versatility.

Tornado С-20 TURBO

In comparison with its predecessor, this model has a larger funnel area, and its working revolutions are 8000 per minute.

Tornador Z-020

Full copy of Cyclone Z-020. It differs only in price and in that there is no air pressure regulator on the handle.

Tornado С-10

This device is similar in characteristics to the Cyclone Z-010. It has the advantage that its funnel is made of steel. This makes this part stronger and more durable.

In addition to the above, there are models that connect to a vacuum cleaner to improve the quality of cleaning and speed of operation. Such devices are represented by the following models: Cyclone Z-014, Tornador Tourbillion, TB-2014BS.

And also it is necessary to pay attention to the fact that the most popular and practical are pneumatic devices.However, there are electrical types on the market that have not gained the desired popularity.

Which compressor to choose for a tornado?

To operate a tornador, it needs compressed air. You need the pressure that is generated by the compressor. It looks like such a detail in the form of a metal box, which, working from the outlet, accumulates a large amount of air, due to which its pressure increases.

In order to choose the right compressor, you should pay attention to the following characteristics:

  • performance;

  • receiver volume;

  • outlet pressure.

A good device should have the following qualities:

  • productivity is not less than 350 l per minute;

  • receiver volume from 100 l and more;

  • required minimum outlet pressure 7-8 bar.

A tornador, as a rule, has enough air with such a receiver volume. However, it is better to have a margin and buy a compressor with a large receiver.

Of course, the higher the price of the device, the better these characteristics. But this is the bare minimum for comfortable work. When studying the parameters of the compressor, it is worth focusing on the tornador itself. So, the longer the hose connecting the two devices, the more pressure the compressor needs. It can reach 10-11 bar.

Compressors are also divided into 2 groups, according to their operating voltage:

  • 220-230 V;

  • 380 V.

The models of the first group will, of course, be cheaper. However, if funds are available, it is better to choose a model with 380 V. It will have the following characteristics:

  • low load on the network;

  • very high rate of replenishment of the receiver;

  • easy to start after pressure drop.

Models using 220 V voltage: Remeza SB 4 / S-100 LB 30 A Patriot, Remeza SB 4 / S-100 LB 30 A.

Models using 380 V for operation are represented by the following devices: Remeza SB 4 / S-100 LB 40, Remeza SB 4 / S-200 LB 40.

When choosing a compressor, it is worth paying attention to performance, as well as reading product reviews. It is worth buying a special oil with this device. It is better to purchase a soft oxygen hose, with a diameter of 6 to 8 mm. The coil spring hose is not very convenient to use, it can rub and thereby scratch the sills of the car.

The option of using a vacuum cleaner together with a compressor stands apart. This modification can be made at home with your own hands. Simply connect the vacuum cleaner tube to the funnel of the gun. Thanks to this, all the dust that will be knocked out and directed to the funnel with the help of the "tornado" effect will fall into the vacuum cleaner.

What products should I use for dry cleaning?

The market is represented by an extensive selection of tornador cleaning products. Among all, several liquids can be distinguished.

Koch Chemie Mehrzweckreiniger

It is sold in the form of a concentrate, which is diluted with water in a proportion of 1 to 5 to 1 to 50. It is considered an elite product. The effectiveness of this concentrate is very high, however, the price for it is corresponding.

Atas vinet

The cleaning agent is intended for "wet" dry cleaning. The thing is that, in comparison with other products, after using it, a wetter trail remains. However, it should not be washed off after use. Located in a low price range.

Grass Universal Cleaner

An excellent choice if there is a need to apply it to different surfaces. Has a concentrated composition, diluted with water in the ratio from 1 to 50 to 1 to 150.

Xado red penguin

It is considered a versatile and effective cleaning agent. It is sold in various forms: ready-made and concentrated. The price for this item is reasonable.

Sapfire Dry Cleaning

Copes mainly with dirt on fabric surfaces. It is perfectly used in everyday life, but it does not cope well with difficult places.

Runway Dry Interior Cleaner

It can be used for both manual and automated cleaning. Its peculiarity lies in the fact that after use, it leaves a pleasant smell, thus being a kind of fragrance.

Turtle Wax Essential

A powerful tool in the middle price range. The area of ​​application includes textile surfaces. The disadvantage of this cleaner is the fading of the fabric in some cases after use.

Among other things, some tornador owners use regular shampoo instead of a chemical cleaner. Of course, this method cannot be compared to the use of chemistry, as it is less effective and requires rinsing it off with water after use. But in the event that this is the only possible option, then shampoo will do.

Pour the cleaning agent or shampoo into a special tank, from which the gun will pick up the liquid and spray it.

How to use?

In order for the cleaning of the car to be as effective as possible, and the tornador itself to fully manifest itself, it is necessary to use it correctly in accordance with the instructions.

To begin with, it is worth preparing the device for work. Many tornadoes have two control taps. The first one is usually located above the tank and is responsible for the supply of chemistry. Some surfaces, such as the fabrics of the car interior, do not require a lot of liquid for cleaning, so in these cases the tap must be turned so that the spray is barely visible to the eye. Other surfaces, such as plastic, on the other hand, are best cleaned using a lot of chemicals. Therefore, in such a situation, the valve must be placed in the extreme or almost extreme position of the full liquid supply.

The second valve is the supply pressure regulator. In other words, he is responsible for how much pressure will be used during cleaning. It is usually located near the handle, at the point where it is connected to the tap.

Before work, it is worth checking if there is liquid in the tank, as well as the serviceability of the compressor. Then you can start cleaning.

Rules and safety precautions

The tornador works with high velocity air and chemicals. Therefore, when using it, it is worth following a number of simple rules.

  • Wear protective equipment such as goggles, gloves and full body clothing.

  • The use of chemicals hazardous to health also requires a special respirator mask.

  • It is only necessary to work with a working tool. Otherwise, there is a risk of injury from machine malfunction.

  • Do not bring the device to open skin, do not point at other people.

  • Do not allow children to use the device.

Following these simple rules will help maintain your health when working with a tornado.

How to do the cleaning?

So, after conducting preliminary tests, you can turn on the tornador and follow the instructions.

  1. Turn off the valve to regulate the supply of the agent.

  2. Tighten the compressed air supply lever and wait until the tube rotates to its maximum.

  3. Little by little start to open the product supply valve. As soon as it is possible to make out the trickles of the sprayed liquid, the tap should be fixed.

  4. The pressure should be adjusted as you work along the way. If there is a lack of power, open the tap slightly, if there is an excess, close it.

Separately, it is worth considering cleaning the car ceiling, as it has its own characteristics.

  1. To begin with, you should mentally divide the ceiling into 4 or 5 squares, as you wish.

  2. Each square should be scrupulously cleaned without leaving any uncomfortable spots.

  3. Keep the funnel at a distance of 2 cm and do not linger in one place. Otherwise, the liquid will foam too much.

  4. After the square is completed, it is worth shutting off the supply of chemistry and simply walking through it with air. This will dry out excess moisture from the ceiling.

  5. The danger in cleaning the ceiling is that it can sink afterwards. To avoid this, it is worth practicing in a small area of ​​it and see what happens.

There are some tips to follow when working with a tornado.

  • It is better to clean with a tornado at low pressure. Otherwise, it can lead to rapid wear of the inner tubes and throat.

  • The surface to be treated should be well vacuumed before starting work.

  • Do not forget to turn off the air supply if you need to put the device down and move away for a while.

  • After completing the cleaning, it is better to turn off the chemical supply valve.This will prevent fluid leaks.

  • When working with a tornador, it is worth keeping an eye on the cleanliness of the funnel. In case of contamination, it must be lowered into a bucket of water - and open the air supply for a couple of seconds.

  • After use, all parts of the tornador must be cleaned.

Review overview

There are many different reviews of the tornado on the net. Many of them are positive, and there are many negative ones. Let's figure out the main advantages and disadvantages, according to users.

Positive

Many buyers note the durability of the tool. Indeed, with proper use, frequent flushing of parts and lubrication of bearings, the device will serve its owner for a long time. The availability of tornadors is also noted. Any resident of the country can buy it for adequate money. No need to go to dry cleaning and spend money all the time. Well, the very efficiency of the device also causes positive emotions among buyers. The device removes light spots without any effort. For complex dirt, you have to spend a little more time, but the result is the same - a clean interior.

Buyers note that with the high efficiency of the tornado, working with it does not take much time. For an uncomplicated area, the cleaning time is 5-7 minutes, and for places where the dirt is more ingrained - 9-11 minutes.

Negative

The first thing that buyers encounter is the weak force of the blown air. For high-quality cleaning, a powerful compressor is, of course, necessary. Therefore, many people find it frustrating. They have to additionally buy a compressor for 8 or more bar and with a capacity of 300 liters per minute. And also in this device I do not really like the fact that after use they still have to clean it up manually. This is necessary so that there are no stains left.

Users did not like the fact that some tornado models use a lot of plastic. According to them, the constant exposure to chemistry will erode plastic sooner or later. Metal parts will be more practical in this regard.

Tornador is an excellent product for both household and industrial cleaning. Like any other tool, it requires personal care: cleaning parts, lubricating bearings. When using it, it is important to follow the safety rules and follow the instructions for use. It is best to choose such a tool based on customer reviews, as well as on your own preferences.

no comments

Fashion

the beauty

House