Glue guns
The glue gun is considered a very important item. It is used for many jobs, is convenient and indispensable in some processes. Today, many variants of such devices are produced, each of which has its own characteristics and nuances of operation. In this article, we will learn all the most interesting about modern thermal guns.
Advantages and disadvantages
There are a lot of different items and accessories for the choice of current consumers that facilitate most of the household, construction and finishing operations. Such items include a glue gun. Today, this device is in the arsenal of many people.
The popularity and relevance of this product are explained by the sufficient number of advantages that it possesses.
- The main advantage of a modern glue gun is its ease of use. In application, such a device turns out to be elementary, everyone can understand the rules of its operation.
- The glue gun is a multifunctional product. It is widely used not only by men in repair, plumbing, construction and finishing works. Often, a girl picks up a thermal gun during arts and crafts.
- When using a glue gun, the glue mass has time to grab in just a few seconds. You don't have to wait long for the glue to dry.
- The joints formed by the glue gun are very reliable and strong, resistant to water and high humidity.
- Adhesives are non-toxic and non-hazardous to the health of users.They can be used even when modeling any children's crafts.
- The glue gun is a lightweight device. In addition, it is usually characterized by its compact size. Thanks to these features, it is very convenient to use hot melt glue, even if all the work takes a lot of time.
- Replacement rods for modern models of a heat gun can be found in many retail outlets, so problems with such consumables usually do not arise.
- Glue sticks are usually much cheaper than standard adhesives.
- Using a high-quality glue gun, the application of the composition can be pinpoint, thin and as accurate as possible.
- Most quality guns are characterized by a very economical consumption of adhesive.
The glue gun is a convenient and practical device, but it has its weaknesses. Let's designate the main disadvantages that such a device possesses.
- The main disadvantage of modern glue guns is that they cannot be used without electricity.
- When using such a device, you need to wait a few minutes so that the glue component has time to heat up to optimal values.
- The device in question does not always bond well between polyurethane and concrete or cement. The same applies to many types of plaster mixes. If the glued bases made of these materials will subsequently be exposed to strong heat, it is better to use other components to fasten them.
- Care must be taken when using a glue gun, as there is always a risk of scalding from the well-heated adhesive.
Appointment
As stated above, the glue gun is a multifunctional tool. It turns out to be very useful for handicraftsmen. When making various crafts, the glue gun often becomes an indispensable component, since only with its help it becomes possible to form the most accurate joints. With the use of a modern thermal gun, a huge amount of repair work can be carried out. First of all, we are talking about the repair of those objects and bases where there are loose types of connections. For example, it can be furniture made of wood.
The main purpose of the glue gun is to properly adhere different parts to each other. However, the device in question can be safely used to seal joints and seams. This function turns out to be especially relevant when laying linoleum on the floor, insulating wires and various electronic elements. Few people know, but the thermo gun is ideal for neatly filling voids in hard-to-reach areas that cannot be reached with other tools.
The glue gun does an excellent job with all of the above tasks. That is why this product has been very popular in recent years. There is no worthy replacement for him.
How does it work?
The principle of operation of this versatile product for home and a wide variety of needs is relatively simple. Let's figure out the features of the functioning of a high-quality glue gun.
- The principle of operation of the device under consideration consists in heating a hot melt adhesive, which has an initially solid structure. It becomes more viscous due to heating, but will become solid again when it cools. This is how reliable and strong connections of parts that are glued to each other are created.
- This process is also called polymerization. Upon completion of the polymerization of the adhesive component, a joint of increased strength is formed. If external forces are applied to it, the material to be glued will be primarily destroyed, but not the existing seam.
In absolutely any model of a glue gun, a special inlet is provided. It is in it that the sticky consumable is placed. Also in the design of the devices there is a mandatory heating element that heats the consumable component and melts it. Hot polymer is discharged through the nozzle when the trigger is pulled.
The stand, available in the construction of the glue gun, makes it possible to quickly remove the device, but at the same time not to burn yourself during breaks.
Views
There are many different types of glue guns in stores today. Different people find it more convenient to use different types of such devices. Consider the features of existing glue guns.
- Professional models. Popular devices that are ideal for construction and renovation work. They are very practical and reliable, provide the highest quality connections. The cost of the varieties in question can be quite high.
- Amateur. For the most basic household needs, you can purchase an amateur model of a glue gun. A similar device will also be useful for needlework. Amateur varieties can be cheaper than professional ones.
Modern models of glue guns differ not only in operational level, but also in power supply. The following varieties are sold in stores today.
- Electrical. The electric hot glue gun is popular, but it can only be operated with access to a working outlet.
- Rechargeable. The cordless thermo gun is mobile and can be used even in areas where there is no access to the electrical network. The main thing is that the battery of the device is charged to the required level.
There are glue guns that are powered not by a rechargeable battery, but by regular batteries.
- Gas. These types of devices require refueling using liquefied gas cartridges.
Model overview
Consider the top of the best glue gun models that are very popular. Let's start with the professional grade specimens.
- Bosch PKP 18E. High quality model from a German brand. Has a housing that is resistant to heat. The device is lightweight, heats consumables to very high rates. The nozzle here is made of high quality metal. The gun is powered from the mains, equipped with a long wire. It's expensive.
- Steinel Gluematic 300. A professional glue gun with a very small weight - only 320 g. Supplemented with heating temperature control. The device is made in a compact format, has a high power, as well as a glue level sensor. The performance of the instance in question is significant.
However, it does not have a switch, is not equipped with the most convenient trigger and heats up for a long time (about 10 minutes).
- Dremel 910JC. This device is also lightweight, complemented by a convenient stand. The temperature values can be adjusted here electronically. Heating up of the adhesive component is rapid. When purchasing the model in question, it must be borne in mind that the cost of consumables for it is unreasonably high.
Now let's take a look at the top of the best cordless glue gun varieties.
- Bosch Glue Pen. A chic model from a well-known German brand, has a very comfortable rubberized case, a shutdown button. The device comes with a battery and a charger for it. There is a universal USB-connector, protection against glue splashes is provided. The model is expensive.
- Sreinel NEO 1 334 109. A miniature cordless tool with an on / off button.The device can demonstrate spot glue application, is splash-proof, and can be turned off automatically. This specimen is also expensive and should only be purchased with 7mm glue sticks. The device takes a long time to charge (up to 3 hours).
Let's get acquainted with the best glue machines suitable for needlework.
- Master Hand. A relatively inexpensive and very convenient device. It comes with 2 glue sticks. In use, such a device is as simple as possible. Heating of the adhesive component occurs in a short time.
A serious disadvantage is the insufficiently high-quality case, which often allows glue to pass through.
- Hobby and pro DS-040. Another convenient model, which has an option to block adhesive leakage. There is a stand in the design. The shape of the case is ergonomic and very comfortable. With this device, glue can be applied pointwise. The device is inexpensive.
- Dremel 910F. A chic tool, perfect for working with rhinestones. Has compact dimensions, ergonomic structure of the body and handle, weighs very little. The gun's power cable is quite long.
True, glue sticks with this product are consumed very quickly.
Let's take a look at the top popular devices, the nozzles in which can be replaced.
- Bosch GKP 200CE Professional. Model with very fast heating, control of adhesive leakage. The device has a stand. The device comes with a useful elongated nozzle. True, this device does not have a shutdown button and is quite expensive.
- DeFort DGG-50N-K. A high-quality device featuring a brilliant build that has no flaws. The design also contains a stand, glue sticks and replaceable nozzles are included with the device.
It is necessary to take into account not the most convenient storage format for this device, as well as its high cost.
How to choose?
Today the range of glue guns is very rich. We will find out what parameters you should pay attention to in order to choose the ideal model of such a device.
- First of all, you need to decide on the type of device. For construction and more demanding work, it is advisable to purchase professional options for two-component glue. If the device is bought for household and household chores, then you can give preference to an amateur copy. For needlework, amateur or specialized devices are suitable.
- It is important to decide on the type of power supply for the device. If the device will be used at home, then you can choose an electrical version that works directly from the mains. It is recommended to buy glue guns that have a fairly long power cord. If the device must be mobile, then it makes sense to look after rechargeable copies. Some users find gas options more convenient and practical, but they will have to be charged regularly.
- The glue gun must be as easy to use as possible. You should hold the device in your hands before purchasing it. The grip should feel ergonomic and fit comfortably in the palm of your hand.
- It is recommended to buy only those devices that are made of high-strength and practical materials that are not subject to heat. The build quality of the glue machine must be perfect so that problems in the form of glue drips and accidental burns do not appear.
- It is highly recommended to choose a glue gun from a range of well-known brands. You should not save on the purchase of such equipment, since the master will deal with the compositions of high temperatures.
How to use?
Let's consider how to use glue guns using the example of linoleum gluing technology.
- First you need to cut the edges of the base material to the very base.
- After that, you will need to thoroughly clean the linoleum from all dust accumulations and dirt.
- Next, the device must be properly refueled. To do this, you need to insert glue sticks into the corresponding sections of the structure.
- Now you can connect the device to the electrical network (if it is electrical).
- It is necessary to wait for the adhesive component to warm up. Different models heat the adhesive in different ways.
- When the adhesive is warmed up to the desired values, they will need to fill the joints.
- In conclusion, the excess adhesive mass must be removed as soon as possible, before it has time to grab.
It should be borne in mind that there is no universal instruction manual for the devices in question. Different types of glue devices need to be used in different ways. Each rod-type thermo-gun comes with an instruction manual, which you should definitely familiarize yourself with before using the purchased device for the first time.
The following video will tell you how to choose the right glue gun.