Sockets in the kitchen on an apron: which ones to put and how to arrange them?

It is impossible to imagine a modern kitchen without a lot of household appliances. She needs electricity, therefore, you need to think about how to place a sufficient number of outlets so that they do not stand out from the overall design and look appropriate. Nowadays, sockets are often located on the apron. We will talk about the features and intricacies of installing sockets where food is prepared in our article.

As for the number of outlets, there is no universal answer to this question. It all depends on how spacious the kitchen is, and how many household electrical appliances are on it. However, experts recommend placing on an apron at least 3 sockets... You can mount the sockets in 2 or 3 pieces in different places.

It is recommended to place the sockets at a distance of 10-30 centimeters from the table top. This is a kind of height standard. If possible, it is better to stay at higher rates. This will be very convenient when dishes are placed on the table or food is placed on it, which will block access to an outlet that is too low.

There are some rules to follow during installation. For example, sockets designed for small kitchen appliances should be 1.1-1.4 meters from the floor.If a backlight is provided, the power supplies for it are located 20 centimeters from the table top. The sockets for the hood are located 50-60 centimeters from the cabinets.

The first thing you should pay attention to during installation is the observance of safety measures when working with electricity. An appliance that plugs into an outlet must be placed at a distance of no more than 1.5 meters from it. The power supply itself is installed at a height of 1 to 1.5 meters from the floor. Make sure that all contacts and wires are watertight. For the same reasons, you should not place sockets in the area of ​​\ u200b \ u200bthe sink and near the hob.

As for the installation procedure itself, it consists of several stages. The installation cannot be called too complicated technically, however, there are subtleties that must be taken into account in the process of work. An untrained person should not take on such a mission.

It should be noted that overhead sockets are the easiest to install. In the case of them, it is often not required to grind the walls for wires. Such structures can be installed on top of the coating, while maintaining its integrity. In addition, such power supplies are quite affordable. If you want to hide the sockets, you can use special hidden options.

This rather new trend, however, is increasingly appearing on store shelves. Such power supplies are points hidden under a special mechanism that opens them when pressed. When the sockets are closed, they are practically invisible. Above is a cover that protects against the ingress of dirt and water.

The overwhelming majority of the current value of such outlets is 6A, which is absolutely not suitable for powerful equipment. It is recommended to use elements from 10A in the kitchen. If this nuance does not scare you, you should choose models made in a steel case.

For those new to the installation of power supplies, it is important to have an understanding of the most common mistakes. Let's note the main ones. There is a possibility that the number of outlets installed will not match the actual needs. This can happen because new electrical appliances are purchased, therefore, more power points are required.

Installation should be done before the kitchen unit is installed. We must not forget about punching a groove, if necessary. A mistake is the installation of the outlet for the hood where it will be located.

When the layout of the power supplies is ready, it is necessary to mark directly the surface of the apron itself. After that, the holes are prepared. How exactly this is done depends on what material the apron is made of. Most often, it is enough to simply drill niches. At this stage, you need to ensure that the drawing is not disturbed.... If the apron is made of glass, you will not be able to carry out the work yourself. Measurements should be made, which are then transferred to the manufacturer who prepares the apron. This is the only option to make holes for the sockets on the glass sheet.

A puncher hollows out a place for the outlet. If it is supposed to be installed in a place where there is already a power source, the previous version is dismantled.A distribution box is installed in the specified area. Sockets are placed in ready-made sockets, their connections are twisted, fastened and insulated. These manipulations are necessary in order to exclude overheating during operation.

As for the installation process itself, you need to proceed as follows. First of all, the room where the work is carried out must be de-energized. After that, an apron is attached to the wall with prepared holes and wiring. Next, you need to install the socket boxes. The wiring is placed in the strobe and fixed there.

In the next step, the socket must be connected to the wiring. During operation, you will need to ensure that the wires are connected to both the outlet and the power distribution box. Further, the connections are checked, and if there are no comments, the grooves must be sealed with a building compound, on top of which the putty is applied. At the final stage, the sockets themselves are screwed on. Electricity is supplied to the premises and the functionality of the power supplies is checked.

A master class on installing sockets on a kitchen apron is waiting for you further.