Machine for manicure Marathon

Working in a salon, a nail service master simply cannot do without a manicure machine. But at home, many of the fairer sex already have such equipment. There is a huge assortment of devices in this direction with different functionality at different prices on the market. Among professional devices for manicure, devices of TM Marathon deserve special attention.

Marathon manicure machines are manufactured by the famous South Korean company SMT, which was founded back in the 70s of the last century. Initially, this company produced high-power devices used in dentistry and cosmetology, and then mastered the production of devices for the nail industry. The company's products are known all over the world and are quite popular.

Under the Marathon trademark, devices are produced for both professionals and home use.

The Marathon manicure machines have a number of advantages.

• The high quality of the products is proven by the high demand for such devices.
• The convenient design is thought out to the smallest detail - the device is comfortable to use.
• The low noise level that the router produces will not distract during work.
• Convenient mechanism for changing attachments will allow you not to spend a lot of time on procedures. Most of the manufactured milling cutters are suitable for it.

• Most of the models are equipped with foot control pedals, which makes the work of the master easier.
• All routers have the ability to move in reverse.
• The built-in overheating protection system will help keep the device in working order for many years.
• A wide range of products will allow you to choose a device with the required technical characteristics.
• All equipment has a guarantee.You can replace worn-out parts during the post-warranty period - there are TM Marathon service centers in many cities.

The lineup of these devices is quite wide. Below are some of the most popular devices.

• Marathon 4. Refers to portable devices. It has four speeds, which are switched by a mechanical handle. The maximum rotational speed of such a router is 35,000 rpm. / min., the power of the device reaches 40 W. The device weighs a little more than a kilogram, the block parameters are 150x85x70 mm.

• Marathon 3 Champion. This is one of the most popular models among professionals. It is equipped with a smooth speed regulator, which can reach 35,000 rpm. / min. Its power is 45 watts. The size of the device is also small - 115x155x80 mm, weight is 1250 g. The body has convenient holes for storing attachments that may be needed during operation. The device is available in white, blue and pink. It does not heat up, it can be used without shutting down for 2 hours.

• Marathon N2. A feature of the device is the ability to smoothly control the speed using a foot pedal, which frees your hands from the need to manually set the speed, which in this device reaches 40,000 rpm. Another convenient function of the device is the ability to engage reverse without slowing down. The power of this router is 50 watts. Block dimensions - 147x115x96 mm. The device weighs 2.5 kg.

• Marathon Multi 600 DUO. It is a high power brushless device. Such a device is equipped with touch control, has an LCD display that shows the rotational speed of the cutters. It also indicates the error code in the event of a malfunction, which makes it possible for the master to correct it without diagnosing. The speed control of the device is carried out both manually and with the help of a pedal. Also, the device is equipped with an auto cruise function. The milling cutter turns up to 50,000 rpm. / min., its maximum power is 230 W. The weight of the device corresponds to 2.9 kg, the parameters of the block are 268x122x228 mm. The device can be wall-mounted if necessary.

• Marathon Handy 702. The device has increased power, which is 100 W, touch control, rotation speed indicator, auto cruise function. The device operates at a maximum speed of 40,000 rpm. / min. The device weighs about 2.5 kg, the dimensions of the control unit are 232x180x137 mm.

In order to make hardware manicure using TM Marathon cutters, you must follow the instructions below.

• 30 minutes before the procedure, you need to prepare your hands: wash your skin well with soap, remove the old coating.
• The manicure procedure begins with the treatment of the cuticle. First, it is pushed back, lifting it, and the "flame" or "candle" of pterygium is cleaned with a nozzle. Then the cuticle itself is carefully cut off with a "ball" attachment.
• After that, the nail plates are given the same length and shape with a "cylinder" cutter.

• At the next stage, the surface of the nail plate and the skin around it are polished.
• They remove keratinized particles from the surface of the hands with a dry brush, apply a decorative coating, and moisturize the skin.
• Now all cutters that were used for work should be disinfected and sterilized. The device itself must be wiped off dust.

By purchasing a Marathon manicure machine for the first time and not having the skills to work with such machines, there are several aspects to consider.

1. Decide what the router is being purchased for. If you need it for home use, then you should take a closer look at a device with a minimum set of functions. Don't overpay for touch controls or car cruises.
2. Beginners do not need to purchase a device with high power - it is easy for them to saw through the nail plate, since there are few skills in working with the machine. It is necessary to work at low speeds, while not pressing hard on the handle of the device.
3. It is better to select cutters in accordance with the work that needs to be done. Don't experiment. When starting the procedure for the first time, you should choose softer ceramic tips with a red notch.
4. The pen of the apparatus should be held in the same way as holding a regular pencil. You only need to touch the nail with the side of the cutter.

Professionals quite often give preference to Marathon manicure machines. These are worthy milling cutters, the price of which is fully consistent with the quality. The craftsmen using these devices note their high power, stable performance, and small size. The lack of cutters in the kit is mentioned as disadvantages, as well as the fact that nozzles must be purchased separately. In addition, it is worth noting that on some devices, on the speed knob, there are no rpm parameters, so you have to set them "by eye".

You will learn more about how to make a combi manicure with the Marathon-3 Champion apparatus from the following video.