Apparatus for manicure

Features of the choice and use of the device for manicure Mercedes 2000

Features of the choice and use of the device for manicure Mercedes 2000
Content
  1. Results when using the device
  2. Structure of the apparatus
  3. Application of the apparatus
  4. Terms of use of the milling cutter
  5. The principles of caring for the device
  6. Varieties
  7. Feedback on the use of the device

Representatives of the fair sex can take care of their hands not only in salons, but also at home. To do this, you will need to buy a Mercedes 2000 manicure machine. With its help, you can make an unedged manicure, in which the skin around the nail is not cut off, which means that it cannot be injured, only the stratum corneum is removed. One of the advantages of using this device for manicure is ease of use and reliability, high power and efficiency in comparison with classic nail treatment products.

As well as the presence of a reverse and a fairly reasonable cost.

Results when using the device

When using Mercedes 2000 you can achieve the following results:

  • eliminate hard particles of the skin, and this is the main thing when carrying out manicure and pedicure;
  • remove the skin around the nail;
  • cut off gel polish or any other;
  • give shape to the nail.

Structure of the apparatus

Fraser is an electrical tool. It consists of the following components.

  • Frame. It contains a power supply, a knob for adjusting the speed of the cutter, a button for connecting and disconnecting.
  • A pen. This is the main element of the device. It is light so that the hand does not get tired. It contains a cutter, the second end of which is attached through a wire to a special connector. There is a built-in suction, which is used to eliminate cut nails or artificial turf.

When the device is turned on, the built-in motor starts a mechanism that makes the abrasive rotate at a fairly high speed.

Application of the apparatus

Using this router include the following steps.

  • Place the device on a surface that should not be wet. Insert and secure the desired router bit.
  • Set the speed to the smallest value.
  • Connect to the network.
  • Choose where the cutter will rotate, you do not need to switch the reverse during the process of nail design. If you need to change the direction in which the cutter or the cutter itself is moving, you need to turn off the device, otherwise injury cannot be avoided, then the device will quickly break down.
  • The device is started using the power button and buttons on the handle.
  • Set the RPM, it must be changed carefully.
  • When the work is finished, set the regulator to the smallest value, then the cutters will stop rotating.
  • Now you need to turn off the buttons on the body and the handle and disconnect from the network.

Terms of use of the milling cutter

To get the desired result, you need to have an idea of ​​how to use the apparatus for manicure. Before the very beginning of use, it is necessary to study the attached instructions. The process of processing nails is carried out with absolutely dry skin. If you want to hold your hands in warm water, then this procedure should be done a couple of hours before the manicure.

This type of nail treatment is done 2 times a month. When using the device at home, you need to turn it off every 20 minutes so that it does not overheat. In the process of processing nails, you do not need to squeeze the handle too much so as not to lead to its deformation.

If there is not enough power, it is better to add revs.

The principles of caring for the device

In order for the device to work for a long time, the following types of care must be observed:

  • clean all parts of the router from dust;
  • so that the cutters are not exposed to moisture and sunlight, it is better to store them in a special bag;
  • make sure that the power cord is not twisted;
  • disinfect the tips and dry them well.

Varieties

One of the variants of the device is the Lina Mercedes 2000. On its frame there is a lever for adjusting the rotation of the cutters and the reverse. It has a comfortable handle of a comfortable design that does not vibrate, this is a favorable side of the application. There is also a stand for it and a 6-piece diamond cutter. The number of revolutions per minute is up to 20 thousand. It is good to use such a device at home and in the salon.

A mechanism is built into the body that prevents the device from overheating.

Feedback on the use of the device

Reviews of women using this device and salon masters are mostly positive.

They note the following favorable aspects:

  • it is much cheaper to do the processing of nails yourself;
  • attractive cost;
  • convenient and easy to use, reliable and of high quality;
  • includes 6 nozzles and 6 abrasive floats.

For an overview of the Lina Mercedes 2000 manicure machine, see the video below.

no comments

Fashion

the beauty

House