Hybrid nail lamps: what are they and how to use them correctly?

Today, not a single modern girl can do without a manicure. If the nails are not strong and brittle enough, the situation is saved by building up artificial plates, strengthening natural plates or a persistent coating.

Means of different composition suggest the use of lamps of different types of glow. For professionals and hobbyists, it is practical to buy a hybrid nail dryer lamp.

The hybrid lamp is popular precisely because of its versatility. Such a device is suitable for curing in the process of building up and for drying gel varnishes. The combination of technical properties of lamps of the type: CCFL, LED and UF presupposes the functionality and quality of all "working" elements. In terms of external parameters and design, the hybrid "UV + LED" is similar to standard UF devices: a plastic case, inside which functional light elements are installed, which are activated when the device is connected to the mains.

In a hybrid apparatus, light is emitted by 1–2 UF lamps and 12 pcs. LEDs that provide high-quality drying of a variety of coatings, including acrylic, regular varnish, biogel.

The built-in number of "drying" elements is enough to fix any coating in a short time, which allows you to significantly save on electricity.

When choosing a suitable device, one must also take into account the purpose for which it is purchased: for personal use or for work in the salon.

Apparatus made of combined materials with a power of 48 W. Equipped with a timer for 10, 30, 60 sec. Power consumption of electricity: 100-240 watts Duration of operation is about 5 thousand hours, reacts to hand movements. The design has a removable bottom.

Advantages:

• various design options;
• compact size;
• high quality and speed of polymerization;
• built-in timer.

Disadvantages:

• there are no rubberized feet on the bottom of the device, which are necessary for better fixation;
• there is no "reflector" inside the structure.

The cost of the device is from 1870 rubles.

The device is made of combined materials. Electricity consumption is standard - 220 watts with a power of 36 watts. Equipped with options: timer for 10, 30, 60 seconds, motion response sensor, removable bottom and built-in reflector. The service life declared by the manufacturer is 50 thousand hours.

Advantages:

• quickly dries gel - varnishes of all types;
• budget price;
• compact dimensions;
• functional characteristics;
• stylish design;
• the case does not heat up even after long-term use.

Disadvantages:

• the system of replacing UF - lamps is not thought out: it is impossible to replace the diodes separately;
• the timer button is inconveniently located (on the back of the device);

Price from 1390 rubles

In the manufacture of the apparatus, a material of a combined type was used. Consumes 220 watts. The duration of use is standard - about 50 thousand hours.

Advantages:

• Motion Sensor;
• removable bottom;
• has a protective "screen" of a movable type;
• insert in the upper part of the body made of rubberized material;
• shutdown timer with an interval of 10, 30, 60 seconds;
• does not need frequent replacement of working elements;
• dries quickly all types of coatings;
• the case and the battery do not overheat during long-term operation.

Disadvantages:

• easily soiled case;
• it is impossible to change the LEDs in the event of a breakdown.

Cost from 2490 rubles

Material, operating time and power consumption are standard, identical to those described above. Shutdown sensor: 10/20/30 seconds. Feature: a cold cathode is used in the polymerization technology.

Advantages:

• Motion Sensor;
• budget model;
• removable bottom;
• fast "drying" of the applied coating;
• timer;
• compact size of the device.

Disadvantages:

• low quality of some elements and assembly complaints;
• heating of the battery and the surface of the case during long-term operation;
• short cable.

The cost of the device is from 1280 rubles.

Advantages:

• motion response sensor;
• information display;
• there is a handle for easy carrying of the device;
• equipment with a removable "bottom" of the magnetic type;
• function of "memory" of the previously set time;
• no overheating of the case;
• power regulation.

Disadvantages:

• short cable;
• it is impossible to replace burnt-out LEDs;
• the body material is not resistant to damage.

Cost from 2699 rubles.

The LED + CCFL hybrid lamp is equipped with gas lamps without filament. This protects the nail plates from overheating, and due to the increased intensity of the radiation produced, the drying process is accelerated.A device with obvious advantages and a guarantee of high-quality manicure. It is only important to understand how to choose the right hybrid lamp.

"Hybrids" are distinguished by the following technical characteristics:

• High power. Cold cathode LED technology gives excellent results. The build-up and drying of the coating is faster, which has a beneficial effect on the productivity and income of the manicurist, saves personal time with an independent manicure.
• Profitability. The used LED technology requires less energy consumption.
• Durability. Durability of materials and reliability of technology ensure stable functionality for many hours of work.

• Security. Radiation waves in this range do not harm the body.
• Great functionality. A range of functions to ensure optimal working conditions, interruptions are minimized, thanks to the overvoltage fuse.
• Versatility. Drying of all types of coatings is possible.
• Wide model range allows you to choose the appropriate design for a specific interior. There are models for two hands, which cut the procedure time in half.

They choose a device based on all the listed criteria, with optimal functionality for themselves and at an affordable price. Too cheap lamps and questionable places of sale should be avoided. Any electrical device must have a guarantee and a quality certificate.

Depending on the type of heating device and the applied coating, the time interval for polymerization will vary, the use of a hybrid lamp is not difficult. Before using it, you need to read the instructions attached to it in order to avoid unwanted results. The time interval must be observed clearly. It is advisable to choose a device with a timer or equipped with a special sound signal. Otherwise, you will have to navigate by the clock, which is not very convenient and distracting during the manicure process.

All devices have a cable for connecting to the network; before starting work, you must insert the plug into the socket. After applying the coating to the nails, the hand is placed inside the instrument. Then the timer counts down the time required for polymerization, after which the lamps go out. Some models are also suitable for pedicure. Special retractable mirror pads allow you to comfortably dry the coated on your toes.

It is the hybrid type lamps that are most often praised by professionals and ordinary consumers. They are preferred for salons and home use, noting functionality, versatility, safety and durability. The diverse design makes it possible to choose a lamp for any interior, which is important for nail service salons. And also reason for praise is the affordable cost of devices, the presence of a shutdown timer and protection against overheating.

In the next video, you will find a review of the Diamond 36W hybrid nail lamp.