Features and instructions for the use of ultrasonic washers for manicure instruments

The times when, in order to disinfect manicure tools, it was necessary to resort to boiling and treatment with antiseptics are gone. More and more often, among the tools of salon masters, there are ultrasonic washers for sterilizing manicure tools that are used when performing manicure. This equipment greatly facilitates the work of the master and has a number of its own characteristics. Let's look at the advantages and disadvantages of ultrasound trays and find out how to use them correctly.

An ultrasonic cleaner for cleaning manicure instruments is a high-tech container in which instruments are placed after each client. The processing is carried out by means of ultrasound with an average frequency of 40 kHz, which makes it possible to ensure the disposal of instruments from contamination even in the most inaccessible places. It is worth noting that after ultrasonic washing, the master necessarily disinfects the instruments with a special solution.

The principle of operation of the device is simple: an ultrasonic wave is generated through the solution poured into the tank. During this, dielectric pressure builds up and tiny vacuum bubbles appear, creating a cavitation effect. It is from the explosion of these bubbles that dirt is eliminated, bacteria and fungus are destroyed. At the same time, the ultrasonic washing is harmless for the processed inventory.

Use ordinary water or a disinfectant solution for ultrasonic cleaning. For each time of cleansing, the liquid is changed. The average processing time for instruments does not exceed three minutes; with repeated cleaning, the total duration increases. This is very convenient because it allows you to offload the wizard in front of the next client.

Ultrasonic sterilizers are considered versatile equipment. They can be used to clean not only manicure tools: such devices do an excellent job of cleaning jewelry and hairdressing equipment. Therefore, in everyday life they will be irreplaceable. In addition, such products are distinguished by the high quality of cleaning of the processed instruments. In comparison with other analogs, they are 8 times more effective, they destroy bacteria, pathogenic microorganisms, as well as dirt and rust.

During processing, the tools are not damaged: their original appearance and purity are restored. At the same time, tools made of different materials (ceramic, metal, plastic, glass) can be cleaned inside the tank.

The master does not need to control the cleaning process, the device is easy to operate and maintain. If necessary, the removable stand of the sterilizer can be easily removed and washed separately from the device itself. In addition, the sterilizer is safe to operate. Compared to heat treatment devices, the ultrasonic cleaner for manicure instruments eliminates the possibility of burns. Another advantage of the device is the ability to store the instruments until the moment of use.

As for the shortcomings, according to the masters, these include the need for additional processing of each instrument with a special solution. Experts, however, are categorically disposed: they call ultrasonic cleaners a means of pre-sterilization cleaning and disinfection. You cannot entrust them with the full mission of purification: they are only the first stage of it. Also, a negative nuance is the overload of the device with an insufficient approach to the choice of its dimensions, taking into account the cleaned instruments.

The principle of operation of an ultrasonic cleaner is quite simple. The instruction will consist of several sequential steps:

• instruments must be placed on the bottom of the sterilization tank;
• liquid must be poured into the container, filling it with about 2/3 of the container itself;
• the device is connected to the network;
• based on the degree of contamination, select the desired cleaning mode;
• press the sterilization start button;
• after the required time has elapsed, the device will automatically turn off;
• it is necessary to disconnect the device from the electrical network;
• after that, you need to open the lid, remove the tools and pour out the liquid.

If a single cleaning is not enough for the master, you can repeat the processing of the instruments.

Today the market of nail equipment is packed with a mass of offers for every taste and wallet. Several models can be noted among the best options.

• 1200 JP BYU - model with a heating function, characterized by a useful volume of an internal bath of 1.2 liters. Has two modes of ultrasound power (35 and 70 W). Equipped with five time settings: 90, 180, 280, 380 and 480 seconds. It has a removable reservoir that makes it easy to drain and fill the tub with water.
• Eurosonic Micro - an ergonomic sink with a half-liter tank capacity, characterized by a high frequency of ultrasound operation (55 kHz). It is characterized by an automatic control, a steel bath, and is equipped with 1 ultrasonic generator. The body of the model is made of heat-resistant plastic.The acoustic power is 40 W.

• Codyson CD-2800 - modification for cleaning manicure instruments made of metal and plastic with an operating frequency of 42 kHz. The material of the case is ASB-plastic, the working container is made of steel, resistant to rust. Product weight is 0.78 kg, volume is 600 ml, timer is set for 3 minutes.
• Dibea DADI DA-968 - modification with a plastic body and a non-removable stainless steel tray. The volume of the inner container is 600 ml, the device weighs 0.77 kg. It has two power modes: 30 and 50 W, equipped with a screen with indicators showing the operating time.

• Ultrasonic Cleaner VGT-890 - ultrasonic cleaner with a power of 35 W, plastic body. It has a volume of 600 ml, operates on a 220-240 V mains voltage, the operating frequency of ultrasound is 40 kHz. The product weighs 905g, the cleaning mode is 180 seconds.
• ruNail 35 W - a sink with a digital display and a power of 35 W, designed for pre-sterilization cleaning and disinfection of manicure instruments. The processing time can vary in the range of 10-15 minutes, the tank size is 600 ml. The maximum programmable timer time is 480 seconds, the frequency of ultrasonic waves is 40 kHz.

When buying a sink for manicure tools, you should pay attention to several nuances. For example, power is an important factor, since it determines the efficiency of the equipment and the processing speed. The optimal indicators are options up to 70 watts. The minimum considered for purchase is 30 watts.

As for the capacity of the internal bath, everything here will depend on the preferences of the master. Some people like 1.2-liter chambers, others are happy with half-liter tanks. When buying, you need to estimate the volume of the processed tool, so as not to overload the device and thereby not reduce its efficiency.

When looking closely at a specific product, you need to pay attention to the build quality and body material. As a rule, low quality options are not difficult to identify externally. Any visual defects, scratches, abrasions are excluded. To verify the quality of the model, you can ask for a certificate of quality and compliance with established standards. In addition, when buying a sink for cleaning manicure tools, price will become an equally relevant factor: you can navigate by it.

In the next video, the stages of disinfection and sterilization of manicure and pedicure instruments are waiting for you.