Glue for nails: types, rules for selection and use

A flawless manicure and well-groomed hands are every girl's dream. It is fashionable, beautiful and simply necessary to look at the level. But it takes time to grow nails to the desired length, so more and more modern women of fashion resort to using patch plates. They are called tips. And a tool such as nail glue allows you to attach the plates and decorate them, as well as repair them.

Nail glue is a translucent, viscous gel designed exclusively for manicure. It is better to use adhesive liquid in a salon environment, where professionals will attach a cover plate and make the perfect design. Or you can try to achieve an impressive effect at home. Convenient packaging and narrow tube nose make it possible to apply light glue directly to the nail without irritating the skin around it.

The chemical composition is based on cyanoacrylate or other similar polymer. Thus, a reliable adhesion of your own nail with the tips is achieved. It is believed that in addition to the main action, the glue does not allow ultraviolet light to dry the plate, protects it from other harmful effects. An exfoliator and panthenol are mixed with the polymer as an additive, as well as strengthening components and antioxidants, retinol palmitate.

• Coo-Coo-City. This two-component product is well suited for adhering decor. Volume - 25 ml. In order to glue the rhinestone, break off both tips, mix the components in equal proportions. Spread on the nail and fix the accessories.
• ORLY. The repair kit contains a glue brush, silk and powder and a sanding block.
• Nail Glue. It is considered one of the best tools according to the estimates of professionals.
• KODI Professional. Contains 10 g per pack, suitable for tips.
• Kiss Brush On Nail Glue. This look provides instant grabbing. Brush applied, holds false nails and foil firmly.
• RuNail. Hypoallergenic and safe, odorless. Meets medical standards.

How to stick artificial plates: instructions for use. As a rule, the glue comes in a set along with the overlay plates. At home, you will need tools, lint-free napkins, a degreaser, deep dishes for hot water.

• Artificial plates are covered from the inside with a degreaser. The excess is filed, adjusting to the desired size. The tips should be wide enough to completely hide the natural surface of the nail plate.
• After removing the remnants of the old nail polish, cut the cuticle with scissors, then you can start gluing. To do this, you need to open the glue and quickly apply it, then apply and hold until the connection.
• If you are mistaken, and the glue had time to set, hands are dipped in hot water for a while. When the tips peel off, the softened glue can be removed with a solvent. Do not file to avoid damaging the surface. Then repeat the procedure again.

To do this, apply a template of the pattern or pattern that you like to the nail. The elements are fixed in the holes left on the template. The rhinestones are placed with tweezers, and the glue is applied drip using a thin stick. You need to think over the location of the rhinestones in advance, then fix them one by one in the holes with glue. After that, a final coating is applied so that the decor is firmly preserved on the surface. It is best to use two-part adhesive gels for rhinestones. They dry more slowly, making it possible to move the elements until they form the desired pattern.

In addition to working with tips, glue is used to repair their own or artificial nails. Also, using the tool, rhinestones, lace, foil and other accessories are attached. And yet the main purpose of this polymer is urgent repairs. It is not always possible to protect fragile nails from the appearance of cracks. The affected nail often breaks off close to the edge and near the soft tissue. The sharp edge can damage them and cause bleeding. Therefore, for a broken marigold and a manicure around, glue will become an indispensable means of restoration. The glue will harden, while maintaining the appearance of the manicure until the original length is restored. If the extension is done with acrylic, there will be no problems. For gel extensions, such a tool will not work.

To repair a nail, you need to do the following.

• Clean the broken place with a buff so that all the roughness disappears. The tool is a block with a high abrasive surface that polishes the nail to a shine. A variety with a maximum degree of abrasiveness is used - over 500 grit.
• Place a special silk material and drip glue on it. It can be flax or artificial fiberglass.
• Pour some powder over the break line.
• Wait until everything is dry.
• Sand and level with a file.
• If the accessory falls off, use a manicure stick. Holding the element, it is enough to drip the compound into the place of attachment.

There is nothing you can do to replace the glue produced by manufacturers specifically for manicure. Neither Moment nor Super glue will work: they are harmful and are not intended to interact with human skin. It is not then possible to completely remove such a reagent.Moreover, health can be damaged, an allergic reaction is possible. It is advisable to wear gloves, even when using manicure glue. If you urgently need to attach a plate, a high quality transparent varnish will do.

If there is a need to urgently remove the linings, this is a simple procedure, since the tips easily move away from the nail plate. The main thing is not to damage your own nails, completely remove from them the remnants of the adhesive gel that holds the tips. The glue can only be removed from the nails using special products. It is necessary to have manicure tools, as well as auxiliary cosmetic compositions:

• disks or cotton wool for removing makeup;
• liquid composition containing acetone, dissolving varnish;
• special tool for detaching tips;
• cream and foil.

The first to use a tool for removing tips. This liquid is applied, then, after removing the false nails, they begin to clean the natural surfaces from the glue. In the places where the pad was attached, most of the frozen gel remains. These lines require cleaning with an abrasive file. Of course, you need to polish your nails carefully and carefully so as not to damage them. The next step is to warm up your hands in warm water. Water is boiled and poured into a large bowl deep enough to immerse both brushes. While the water cools down, it contains a nail polish remover that needs to be warmed up. In a warm form, the product will work more efficiently.

The next step is to warm up your hands in warm water. Water is boiled and poured into a large bowl deep enough to immerse both brushes. While the water cools down, it contains a nail polish remover that needs to be warmed up. In a warm form, the product will work more efficiently. Hands are warmed up for at least 10 minutes, cotton pads soaked in nail polish remover are applied to dirty places on the nails. In order for the cotton to hold, a fixing foil is used. After 15–20 minutes, the discs can be removed, and the nail plates can be wiped with acetone again. The most difficult part of the procedure is over. It remains only to hold your hands in warm soapy water, finally removing small residues. Apply soap and water again, putting your hands under the running stream. Now comes the turn of an emollient cream or nourishing mask for the skin of the palms.

It will not be possible to completely remove the glue without damaging the nails. Especially if you often use overlay tips. But with complex care with the help of special baths and regular application of moisturizing and nourishment, the hands will remain in excellent condition.

For information on how to stick nails, see the next video.