Assembly diagrams of cute origami

There are many origami schemes for both experienced and novice craftsmen. You can make cute paper figures in just a few minutes. The most important thing is to prepare all the necessary materials.

The most interesting is the folding of the animals. For example, you can make a cute paper bunny. This will require a sheet of colored paper and a felt-tip pen (for the design of the face).

The manufacturing process consists of several stages.

1. Fold a square piece of paper in half and then mark the center of the triangle.
2. The base must be wrapped back, and then bend the triangles along the sides. These will be the ears.
3. Then you need to tuck and hide the top and bottom corners of the square. It turned out to be a muzzle.

The scheme of creation is clearly shown in the figure.

You can also make a whale. You will need paper and a felt-tip pen. The scheme is simple, the process is as follows:

1. you need to take a square sheet of paper, mark the diagonal and turn the lower fragment to this mark;
2. now the workpiece needs to be turned over, the upper and lower parts bend to the middle (the latter has already been folded);
3. to form the back of the future whale, you need to bend a small corner from above, then turn the part over and arrange the tail.

The diagram is shown in more detail in the figure.

A cute box for storing some small things can be easily made out of paper yourself. For making a box in a classic style, thick wallpaper, craft paper or Whatman paper are suitable. If you make a box with a lid, then it is best to use solid cardboard.Two squares should be prepared from this material. Moreover, one of them should be 0.5 cm smaller than the other.

The stage-by-stage process of making the lid looks like this.

1. A smaller square is taken into work. It needs to be bent diagonally 2 times in both directions. Then all the corners need to be connected at the center point. In origami, this shape is called a "pancake".
2. The resulting "pancake" must be put on a flat surface, tuck both edges to the middle. This stage of work is shown in more detail in the figure.
3. Open the side flaps, tuck the top and bottom edges to the center line.
4. The top of the workpiece must be opened, the same is done on the other sides.and. The lines should be well ironed.
5. The so-called flaps must be raised and folded into the inside, to fold into an envelope. The result is shown in the picture.

The box itself must be made in the same way.

Butterflies can also be attributed to cute crafts. Making them with your own hands is simple, and the set of materials is minimal. Would need:

• A4 sheet of paper;
• scissors.

Fold the sheet of paper and cut off the excess so that the shape turns out to be square. Next, several simple steps are performed.

1. Fold diagonally in both directions. The corners should be bent as shown in the figure.
2. It is necessary to turn the workpiece over, and bend the corners.
3. It is necessary to bend the protruding corner and glue it.
4. Now the almost finished butterfly needs to be turned over and the wings bend back. The result is shown in the picture.

All of the above crafts can be made by both beginners and experienced craftsmen.

A detailed workshop on making cute origami can be found in the following video.