The most complex and beautiful origami

From an ordinary paper completely flat sheet, you can make a voluminous elephant, zebra, bird. You can make a romantic boat or a touching crane. And the art of folding - origami, helps fingers and paper interact subtly.

According to this scheme, you can build a completely recognizable beautiful eagle. This is not the highest level of difficulty, but for a beginner, this job may seem daunting.

Eagle using origami technique step by step.

• A sheet of paper 30x30 cm of the desired color (in this case, white) is taken and folded diagonally... And then you need to unfold it - and fold it diagonally again.
• Expand, and this time fold the sheet in half... You will get a center line to which you need to put the lower side (bend). The top side is the same.
• Sheet turns and then folds in half.
• The sheet unfolds and the center line is formed again, to which you want to bend the lower side. And the top one too.
• Now the sides need to be opened, rotate and set aside in one direction (the diagonal will be inside), and in the other. Press down on the paper.
• On the other side - the same principle.
• Rotate the figure: bend up one corner, then the second, and mark the folds with your fingers.
• Open the paper, lift up: lay one triangle down, and the second triangle also down.
• You should get two free triangles - they need to be lifted up. Mark the folds again, turn the craft over, and fold the lower side to the center line.
• Bend the top side to the center along the fold line.
• Turn the workpiece - uhthat will be the base of the wings. We open one wing, pull it inside, there will be a triangle that needs to be bent. A sharp corner should form at the bottom.
• Keeping a sharp angle with your fingers, the wing returns to its place. The element is straightened and closed. On the other hand, it is the same. The winglet is folded back.
• Turn the workpiece... On this side there will be two free corners: first you need to deal with one - a fold line is made, everything opens, and the side is folded to the designated line. There will be two folds along which the paper gathers into a long narrow triangle (future foot). It is necessary to bend it to one side and the other, and then the same thing on the other side - the blank of the second foot. There will also be a long narrow triangle, it also needs to be bent and aligned.
• The right foot must be removed to the side so that there is no interference, the fold line should go from the top corner to the bottom. It is necessary to fold carefully, because several layers have already formed from the paper. Return the foot back. Repeat all the same on the other side.
• Next, the workpiece must be folded in half, two legs together. Now it's time to make the wings - bend the wing up along the newly created fold line. The coup, on the other hand, do everything the same way.
• All folds must be straightened, everything must be even.
• Now we need to make the legs by working with two double small triangles. We open the triangle with our fingers, pushing it inward. Then open it again and push it in the other direction. It's the same with the second foot. It is imperative to check the symmetry.
• A claw is made on each foot - a small triangle pressed inward.
• It's time to style the wings: make a fold, folding the wing almost in half. Make another one along the upper diagonal fold. You will get a triangle. And so on the second wing.
• The wing should be rounded with your fingers, and the second too.
• Tail along the fold, you need to bend to the side (two symmetrical triangles).
• Now the paper needs to be opened - not the most beautiful hump will be found in the center. He pushes inward, hides.
• The head remains - at the level of the neck, a fold is made with an upward bend. And in the other direction. It is necessary to outline a fold for pushing the paper: we open it, push the paper through the folds, collect it with our fingers. The neck will be powerful. And bend it again in one direction, bend it in the other - opened the paper, pushed it through.
• Curved beak is done by opening the paper and pushing the triangle inward.

For information on how to make an eagle using the origami technique, see the next video.

This figure can also be made in stages by a person without much experience in paperwork. Acting strictly according to the instructions, everything will work out the first time. The complexity of this work is estimated at 4 out of 5. Algorithm of actions.

• You will need a square of colored paper 30 by 30 cm. You can use a regular one, you can use a printed, coated, and so on. Fold the sheet in half, unfold and again in half. Flip and fold diagonally. And again diagonally.
• Now we need to make a "double square" shape: bend one corner, the second corner and a square will come out along the folds. Bend one of the sides to the center line and the other too. Bend the upper corner along the nearest line.
• The paper must be opened and lifted, and then bend one and the other side inward. Lower the corner down, turn it over and repeat the same operations relative to the center line.
• Bend the triangle down again open the paper, collect a long diamond.
• Move the long triangle down bend the upper triangle to the intersection of the two lines. They bent it, made a fold, bent it to the other side for a better layout of the paper. Work out the fold well.
• Open the corner, the craft as a whole, and then push the square inside... It will be very visible from above.Assemble the craft again, working through the fold lines with your fingers, and bend it.
• Using two fingers, lift the triangles, drawing the folds.
• Turn one upper corner down, you get one fold. On the other hand, it is exactly the same. Turn the work over and make a fold again by folding the triangle down, then the second.
• The craft is folded in half with triangles aligned. They should eventually be on the side.
• The triangle rises up, the side is folded with a fold to the center. Unbend, do the same with the other side. You will get two folds, along which you need to collect the paper to obtain a long narrow triangle at the top. It must be collected with your fingers and bent to one side.
• The workpiece is turned over, the same is done on the other side: up a triangle, in one direction a fold to the center, in the second - and also to the middle. Gather paper along both folds, align the triangle. The two long triangles will soon become dragon wings.
• Turn the workpiece over, there will be long triangles at the bottom, they go to the upper parallel line. A fold is made. Open the paper, the large triangle up, both folds are ironed, and a long tail is collected along them. On the other hand, it's the same. The paper must be ironed well. You will get a blank, pressed against the table, resembling three pyramids, two of which are hidden behind the central one.
• Since the triangles are wide, they need to be made a little narrower. The left "pyramid" must be attached to the bottom line, bend it. Mark the fold. Flip - and the same thing. Turn the figure upside down, gently pull on the edge of the paper. The triangle will bend into a small dragon's paw. On the other hand, it is the same. And with the right "pyramid" everything is symmetrical.
• Forming the legs: turn the small triangles obtained earlier, turn back, bend down. The sharp corner looks perpendicular. Do this on both sides. Open the paper, folded in half with a sharp triangle, push it up, fold in half - you get the neck of a dragon.
• Neck push down, up, with a sharp thorn, collect. You will get a dragon's face.
• Flip the dragon, bend the wings to the side so as not to interfere, bend the small triangles again, but this time forward and down. These are the hind dragon legs. Do the same on the other side.
• Now you can grab the wings: bend the wing forward, bend it up a little, you get a fold. On the other hand, it is exactly the same. The wing will be double, you need to open it and pull the paper up. Make a fold with your fingers, you get a beautiful bend, by pushing upwards.
• Beautiful thorns must be made on the tips of the wings - bend the corner down and immediately bend it up, fold the wing. And on the other hand.
• There is a tail left, it must be made curved... Open the double-tail paper, push it inward, collect, ironing the folds well. And again open, push down. And the same thing again. A very beautiful broken tail will turn out.

For information on how to make this dragon, see the next video.

And this list contains a selection of, if not the most complex, then definitely difficult models of origami figures designed for adults... Children can try too, but for beginners and younger students, these examples are difficult.

Interesting DIY origami ideas.

• Fox... Nowadays, such volumetric figures made from A4 sheet are very popular. The picture shows a conditional plan step by step. The job requires a lot of care, but everything is real.

• Pandas, koalas, lemurs - also popular folding models. And this option is far from the most difficult in the world.

• Dog... Not too complicated, very stylish, because the Japanese motives are clearly guessed here.

• One more the Dragon medium difficulty according to Darren Abby's scheme.

• Horse based on folk art.And in just 10 steps, although it will turn out to be not the easiest one.

• Snail... It's quick, easy to make, and it's a worthy candidate for a collection of cool figurines.

• A cat with a rounded muzzle. This is already a higher class, because the work is not done from one sheet, and certain skills are needed to create the roundness of the muzzle.

• Pig... Simple and funny, you can make a lot of these in one evening, for a whole garland.

• Hummingbird... Everyone is attracted by her sharp nose, but it turns out that this is not particularly difficult to do.

• Cancer... If you need a series of river dwellers (frog, pike, swan, cancer), here is a decent option for the embodiment of the latter. Enjoy your creativity!