How to make origami in the form of a transformer?

Passion for origami is considered not only fascinating, but also a useful activity that contributes to the development of thinking, imagination, fantasy. An origami toy in the form of a transforming robot will become much more interesting if you make it yourself.

Since the art of origami is crafts made from paper, you need to prepare paper sheets for work. In this case, a regular sheet of A-4 size will not be enough, so you should pay attention to paper of a different size (A-2 or A-3). Foil on a paper basis is ideal for this, this will allow you to make a model in silver color.

Making a robot out of paper is easy if you follow the instructions, be it simple origami or modular origami. A diagram with pictures and directions will make it easy to complete the task.

After preparing the material, they begin to work, performing it step by step.

1. You need to take a piece of paper, fold it into a square, and cut off the rest. Only a square will be used for work. It is necessary to fold it diagonally according to the picture, and then tuck it so that the corners of the sheet meet in the center.
2. Followed by bend the top corner down, and fold the right side to the left.
3. Then you need to grab the edge of the paper from above and move it to the side. so that you get a shape like in the picture.
4. After that, they begin to fold the square on the other side. It is necessary to raise the middle of the upper square by doing the same action on the other side. As a result, you get a basic bird figurine.The ends of the paper that are on top must be lowered to get the model, as shown. Similar actions need to be done from the other side.
5. The result is a figurine with wings, they must be folded in the middle and lowered down. Next, you should raise the lower triangle up, directing the side wings to the center.
6. After that, you need to change the top of the workpiece with the bottom.... Having done this, they begin to fold the upper wings, directing them to the middle. As a result, rhombuses are obtained at the top and back, they need to be folded in half, turning up. Next, fold the side corner to the center and fold it inward. The same actions are performed with the remaining corners.
7. The resulting figure must be turned over, and pull the triangle forward just in the middle.
8. Further, according to the diagrams, they begin to fold the transformer itself.
9. The result is an airplane. It remains to finish the head and legs with hands to make a robot.

You can execute the model in a different way.

To do this, take a piece of brown square paper (21x21 cm), three yellow strips (7x21 cm) and a piece of white paper (7x10 cm).

Progress.

• To make a craft, you need take a brown sheet and fold it diagonally.
• The sheet is then unfolded and the right side is folded towards the center. The same is done on the other side.
• After that, the lower part is tucked towards the center, the workpiece is folded. The result is a figurine in the form of a triangle. It is important to iron the lines well as you work.
• Next, you need to tuck each side of the triangle, and bend the bottom corners.
• The workpiece is unfolded and folded in half, stepping back 1 cm, and folded again. The result is the bottom of the robot.
• Start the construction of other parts... To do this, take a strip of yellow paper, fold its edge on one side and the other, then wrap it in the middle and turn it inside out so that a triangle is formed. The same actions are done on the other side.
• The finished workpiece with triangular edges on each side is unrolled, then folded horizontally, and the edges are folded on each side. Then the triangles need to be tucked towards the center and smoothed out.
• Then the element on the opposite side follows, put into the formed part... Similarly to this part, the next element is made, its side parts are straightened and inserted into the first element.
• After that, you need to take the third yellow strip, fold it and cut it into 2 parts... Next, the rectangular blank is folded in half, the corners are wrapped, and the sides are tucked towards the center and folded, then the upper corner is turned out. The same steps are carried out with another piece of yellow paper.
• Assemble parts. For this, elements of yellow and brown colors are connected, supplemented with hands, putting them behind the back of the robot.
• At the final stage, a piece of white paper is used for the blank. Each corner is folded to the center, then tucked to the middle to form a triangle, the corners of which are folded inward.
• Then the part is bent in half, and each side is wrapped, connecting them in the center... It turned out a head for a robot, it is attached to the base. To make it hold better, you can glue it with glue.

You can get acquainted with the work in more detail by studying the video.

When starting work on making a model of a robot, it is worth listening to some useful advice.

• Shouldn't rush... It is important to fold the lines correctly and smooth them out neatly.
• For the construction of figures, it is better to use thick paperso that the product does not lose its shape.
• Using scissors it is important that they are not stupidotherwise the cuts will be sloppy.