Philips steam generator repair

Philips steam generators are in great demand among modern consumers. These functional devices are presented in a large assortment. This technique attracts the attention of users with the highest quality. Genuine Philips devices are durable, reliable and attractive, but that doesn't mean they can't break. In this article, we will learn how to properly repair branded steam generators in the event of various breakdowns.

Even the highest quality and most reliable steam generator produced under a well-known brand can break down. Breakdowns are different - small and large.

Let's get acquainted with their list.

You will need:

• kit flat and cross screwdrivers;
• wide knife or an unnecessary plastic card, or special tool for removing parts with snaps (a knife can accidentally scratch the body of the steam generator, thereby spoiling its appearance);
• multimeter - this is a device that will be necessary in order to ensure the integrity of all important elements of the device being repaired;
• may be necessary and soldering ironif you need to change certain parts.

In addition to tools, the following may be useful for repairing equipment. materials:

• insulating tape;
• special heat shrink tubes;
• pliers;
• a piece of sandpaper.

All tools for work must be high quality, reliable and whole.

Philips steam generators can suffer from various types of breakdowns. Most of the problems can be dealt with with your own hands, without contacting specialists. Let's look at some examples common breakdowns and ways self-repair of such equipment.

It so happens that the steam generator does not produce the required steam during its operation. Possible reasons may be the following circumstances.

• The device is clogged with limescale. To remove limescale, you need to clean the equipment. The lion's share of the models produced by the brand are equipped with an automatic descaling function - smart Calc-Clean (when you need to descale the device, the De-Calc button flashes and usually a red or orange light is on). To do this, water is poured into the device, plugged into the network, and then the appropriate button is pressed. After a couple of hours, the liquid must be drained by flushing the boiler again. In some models, you will have to change cartridges.
• The steam key has not been pressed. To solve this problem, the button must be pressed and pressed until the unit starts working.
• The device is not fully warmed up. Often people mistakenly believe that the unit has stopped emitting steam. In fact, such a technique heats up within 2 minutes after starting, after which the steam still goes out.
• There is little water in the boiler. If the device does not produce steam, there may be a lack of liquid in its reservoir. This problem can be solved by adding water to the desired level.

A genuine Philips steam generator may not turn on for the following reasons.

• Damaged power cord. If there are no noticeable defects, it is difficult to find the punctured area. We'll have to contact a specialist.
• There is no mains power. To check that the outlet is working properly, you need to plug in any other device.
• The indication of switching on does not work when the equipment is working properly. You will need to press the button that supplies steam to test the functionality.
• Failure in the actions of the electronics. In this case, you should visit an experienced master.

If liquid leaks from the steam generator, the reasons may be as follows.

• Condensation has accumulated in the steam hose. A problem that arises after a long downtime of equipment. You can solve the problem by directing the soleplate of the iron to the side, while holding the steam button until the water stops flowing. It is also recommended to check the condition of the hose for kinks or clamps.
• Water with aromatic additives or impurities was poured into the container. In this case, the boiler needs to be flushed. Then clean water is poured into it again and the device is started.
• Frequent activation of the steam boost function. The technique can be used further, but wait a little before pressing the button for an intensive steam supply again.
• After cleaning the equipment, there is still water in it. It can flow out of the sole. You just need to wipe it with a dry cloth.
• The shutter valve is broken. It needs to be replaced.
• The holes are clogged with limescale. Cleaning is required.

The following things can be causing this problem.

• The device was filled with water containing impurities. In this case, flushing of the reservoir is required.
• The technique was not used for a long time, but a little liquid remained inside. The boiler must also be washed thoroughly.
• The heating element is out of order. You will need to replace it.

Other problems can occur with your Philips steam generator iron.

• In the device, blue and green lamps can flash alternately or simultaneously. Most often, with such a malfunction, the technician is sent to a service center. This breakdown is associated with damage to the yellow wire in the design of the device.
• It so happens that the steam generator beeps and at the same time the orange Anti-Calc indicator lights up on it. Perhaps the fact is that the descaling cartridge has become unusable. If, after replacing it, the signals continue, it is worthwhile to remove and reinsert a new cartridge. Replacement should be done only after disconnecting the equipment from the network.
• The above alarms can be shown every 2 weeks. In this case, it is easy to repair products - you need to fix the cartridges more tightly inside the devices.

If the steam generator breaks down, the reason may lie in breakage of the electromagnetic coil.

You can disassemble and assemble damaged equipment like this.

• Aggregate first disconnected from the network.
• Removable protective rubber bands from the steam station, unscrew the bolts above it.
• The top cover is removed. There is an upper body part under it, fixed with 3 screws. They must be unscrewed.
• Removing the housing reveals the coil. It needs to be replaced. It is attached with just one nut.
• Back you need to assemble the equipment in the same waybut in reverse order.

Of course, there is no guarantee that the Philips branded steam generator has failed precisely because of the need to replace the electromagnetic coil. Probably, the problem lies in other important details of household appliances.

Having a Philips steam generator at home, you need to be prepared for the fact that for some reason it may break down (like any other equipment).

In this case, it will be better if you arm yourself with some useful tips and tricks.

• Do not be alarmed when, upon first use, the steam generator generates steam with a slight delay. In these seconds, the technique is working properly, but just preparing for further actions.
• To prevent hot splashes from the steam generator from getting on the skin while repairing leaks, keep the device away from you.until the problem is completely resolved.
• The correct operation of many parts can be checked even in the store at the stage of purchasing equipment. Typically, sales assistants do not refuse buyers such a request.
• If the breakdown is too complex and serious, and you do not have the relevant experience and knowledge, it is better not to waste time in vain and not try to fix everything yourself, but visit professional craftsmen. Otherwise, you risk only making it worse and breaking the generator.
• When disassembling a branded steam generator, you should be as careful as possible. Be careful not to damage the case, as it can easily chip or scratch, especially if you open it with sharp tools.
• If the device of a branded steam generator does not provide a "smart cleaning system", mentioned above, then you can get rid of scale in the tank with citric acid. It also easily dissolves mineral deposits on the outsole.
• If there are serious blockages in the steam generator chamber, due to which steam is not supplied, it is not recommended to go to self-repair. It would be more correct to visit the service center.
• You can never face many breakdowns and problems of branded equipment if you use it correctly and carefully. Operate the steam generator in accordance with the instructions, treat it carefully.

Watch the video for repairing a Philips steam generator.