Features of wood candlesticks

The peculiarities of wooden candlesticks are not the most well-known topic even among lovers of such crafts. It is necessary to deal with wooden candlesticks made from saw cut and from branches, with other options. A separate important topic is how to make a candle holder according to a drawing with your own hands on a lathe.

By itself, the extravagance and uniqueness of wooden candlesticks turns out to be both a plus and a minus. They may or may not fit into the interior, depending on the tastes and nuances of the design, and the final decision must be made independently. Wood fits perfectly into the most traditional, most old-fashioned design options, and it would be strange not to take advantage of this advantage. The candle in the candlestick provides an enchanting atmosphere that no good electrical appliance can achieve. The unusual appearance of the wooden stand makes it a good choice for holidays or various rituals, but not for normal everyday use.

The number of variations of candle holders is very large, and you can embody the most original ideas and projects without any problems. A chiseled decorative candlestick is quite popular. Changing its width at different levels in height creates a truly unique effect. VThis design is similar to an old candelabrum. A tall object looks attractive in any environment.

Carving can also be considered a good option for decorating candlesticks. High-quality carved models sometimes look unusually expressive and have a complex surface. Quite a few consumers prefer semi-antique solutions. They are most attractive in interiors decorated in the same way, or in loft rooms. For a romantic effect, a heart-shaped support structure can be used. The photo shows just one of these do-it-yourself options.

Some consumers choose models in the form of a Christmas tree. They do not have to be large or even accurately reproduce the appearance of the tree. Enough and stylization under its contour. Finally, bark constructions can also be used. Often a glass core is inserted into them.

It is not so difficult to carve homemade wooden candlesticks according to a drawing on a lathe, you just need to make sure that the drawing itself is correct and consistent with the plan. It is also worth studying the main stages of work and finding out the characteristics of the material used. The structure is most often made up of a top and a bottom. The top is obtained according to the sketch, holding the workpiece exactly in the center. A four-jaw chuck is required to obtain the bottom element.

It is undesirable to step back from the edge during the marking process. From above, the structure must be drilled in the middle to make a hole for the candle. After clamping the structure in the centers, it is necessary to form a cylinder. The top of the candlestick in this master class is made starting from the tailstock. It is necessary to grind everything sequentially, section by section.

The scheme of work is as follows:

• markup;

• diameter manipulation;

• reduction of a pair of points;

• fine-tuning;

• elaboration of complex and problem areas;

• the formation of a thorn.

Working with the base on the machine at home is as follows:

• cut a circle along the compass;

• saw off with a band saw;

• make a hole with a screw cutter;

• create a new center;

• remove the beating;

• rounding the workpiece, level the surface;

• mark this surface for the chuck jaws;

• unfold the workpiece;

• grind the structure exactly to size;

• glue the top of the candlestick into place;

• coat the spike and groove with a layer of PVA;

• squeezed by the back center;

• after 24 hours, the tailstock is removed and the bezel is placed near the edge (it is impossible to work without the bezel);

• prepare a hole for a candle;

• carry out the finishing of the structure.

There are many other options, first of all, sawn timber structures. The advantage is that there is very little work to be done on the workpiece. You can choose different designs and form a complex set of candlesticks. A cell in the cut on the cut can be made using a Forstner drill or another drill that allows you to form a round blind hole. A good solution, in particular, is to use a crown for wood.

Basic steps:

• cutting off the desired area;

• preparation of markings for installing candles;

• cutting out blind holes;

• aging wood, giving it a shabby look;

• painting the surface in the desired color;

• giving it the desired texture.

Making a candlestick from branches begins with cutting out a piece of burlap. This material is glued to the glass. Only in the next step will it be possible to determine how many branches are needed and what their length will be. First of all, you have to glue the bark, and then twigs are attached to them. Then the twine is fastened in the form of a bow, and a glass is inserted inside.

Just making a wooden candlestick is not all. It is also necessary to pay attention to the design of the product. A very good way to decorate candlesticks, especially those intended for special occasions, is decoupage. The structure is sanded and shaken off of dust. Further:

• form the required color (using any suitable dye);

• dried;

• select motives;

• cut out proportional parts of the image;

• attach the structure to the desired surface;

• grind off excess;

• varnished;

• dried;

• again protect the applied decor with a varnish layer.

Designed for sleek looking models, they can be quite expensive. But still buying them (or making them yourself) turns out to be quite an attractive option. A classic solution to a complex geometric shape can be a good filling of space. Such a candlestick is ideally combined with a dark wood table and a potted green plant. Alternatively, you can still consider:

• installation on an elegant napkin;

• a group of richly dark candlesticks of different heights;

• improvisation - candle nests in a bar, adjacent to a bouquet of flowers.

For information on how to decorate a candlestick, see the next video.