Dress pattern with one-piece sleeves

In this article, I would like to share the patterns of dresses with one-cut sleeves. Why with one-piece? Because the offered patterns are very simple and girls with basic sewing knowledge will easily sew an outfit.

There is no such reason and reason not to wear a dress with a one-cut sleeve. Romance will be expressed in a flying chiffon sleeve, status in satin, femininity in knitwear.

There is room for a one-piece sleeve in any style. So let's get down to business.

A simple cut is the perfect solution for fabrics with a rich appearance, with a fancy pattern or just a pretty print.

This model is attractive with one-piece sleeves with plackets and a deep neckline at the back.

Cut from the lining and main fabric to the front and back with one-piece sleeves with folds, burlap pockets in the amount of 4 pieces, jumpers for the back and straps for sleeves.

• Sew darts on the front.
• Sew shoulder and sleeve seams. Leave room for a pocket in the side seams.
• Sew the pockets into the side seams.
• Stitch the lintel and baste to the left edge of the back neckline.
• Sew darts on the lining, and sew shoulder and side seams.
• Pin the lining to the neckline of the base fabric and sew.
• When trying on a dress, attach the open end of the lintel under the right edge of the back neckline.
• Lock the jumper under the left edge of the neckline with a button.
• Sew the sleeve trims from the lining and main fabric along the bottom cuts, then sew short ones.
• Sew the open cuts of the planks to the sleeves, aligning the seams.

An airy dress with a shawl print and wide sleeves envelops with ease and at the same time elegance. And the elasticated belt favorably emphasizes the waist.

Cut out all the details from silk cambric, adjusting to your size.

Mark the cut on the center piece of the upper backrest. A cut-out rectangle 12 * 4 cm, which is superimposed on the marked line of the cut and sewn on, can serve as a cutting edge. You can separately cut out a one-piece facing for the neck of the back with a cut.

Watch a video on the topic.

• Sew the side parts of the bodice from the central one, do the same with the details of the back.
• Sew tape to the neck of the back and front, if the cut was turned separately.
• Stitch shoulder seams and upper sleeve seams.
• Sew the neckline.
• Stitch the side seams and bottom seams on the sleeves.
• Sew the skirt and stitch to the top of the dress.
• Tuck the seam allowances on the skirt and hem of the sleeves and stitch for the drawstring. Pull elastic or elastic through the drawstrings and sew on the open areas.
• Hem the bottom of the skirt.

There is another version of the dress with a one-piece sleeve and a cut-off top. He has every chance to faithfully serve as a little black dress. If you want, you can experiment with colors, for example black top and white bottom.

It is better to take a fabric of medium density with a high content of elastane.

The top of the dress is cut out on the fabric folded in half, so the sleeves are one-piece. Be sure to place marks in the center of the back and front.

The dress has no lining, so you need a piping glued with doublerin.

Open out the skirt by folding the fabric in 4 layers. If you wish, you can also cut out a belt. Its length will be 2.5 m.

Let's start stitching the parts:

• process the facing on the overlock;
• fix the piping on the neckline of the top of the dress with pins, aligning the marks. In this case, the edge of the neck should be larger than the edging;
• form folds at the neck;
• stitch the facing and make notches so that it does not turn outward;
• sew the top on the sides, and process the edges of the sleeves and bend 1 cm to thread the elastic;
• sew a skirt;
• Stitch the skirt and top by joining the side seams.

Color-blocking fitted dress with raised seams allows you to play with the color palette, and most importantly, it suits any shape.

The dress is very practical, if worn by everyone, as it is made of non-crease high-tech jersey.

Cut out all the details from knitted fabric in black and yellow.

• Create pleats in the middle of the upper front.
• Sew the side parts of the shelf with the middle ones from the control marks to the corners.
• Cut the allowances in the corners, then grind the shelves from the corners to the bottom cuts.
• Sew darts on the details of the bodice of the back and sew both halves.
• Sew shoulder seams from control marks.
• Iron the upper edge of the front insert and sew by hand. Sew the insert from the bottom to the cross marks.
• Iron the allowances along the neckline to the seams of the back yoke stitching and sew by hand.
• Sew the yokes to the back up to the marks. Cut the allowances in the corners and then continue the stitching stitch.
• On the bodice of the dress, sew a side seam from the reference mark.
• Press and sew the armhole cut and hem of the one-piece sleeve.
• Sew darts on the skirt. On the back panel, make a middle seam, and on the front panel - embossed.
• Sew the right side seam on the skirt.
• Stitch the skirt and bodice.
• Sew in the zipper and fold the hem of the skirt.

Probably, it makes no sense to repeat and lay out the next pattern of a straight dress, only with a long one-piece sleeve. Indeed, in any pattern you like, you can lengthen the sleeve and adjust its splendor. Another thing is a kimono dress, delicate and feminine.

Here is an example of pattern modeling.

How you can sew a charming dress without a pattern, see the video.

The methods of sewing a dress with a one-piece sleeve are very different. And this allows, on the basis of existing patterns, to create new and unique models.