How to make a slime from glue and sodium tetraborate?

Probably, there are no children who would not try to make slimes at home. Most often, glue with the addition of sodium tetraborate is used - these are the most popular bases that allow you to create viscous and durable anti-stress. Let's dwell on the most interesting techniques.

Slime, slime, gum for fingers - all this is one and the same toy, visually resembling a multi-colored lump of mucus. Kids, and adults alike, like to knead them, shift them from one hand to another, throw them on the cabinets and watch them flow down smoothly. They are not cheap in stores, so many guys are trying to find simple techniques for creating slimes at home - the most common ones include glue, as well as borax (borax, sodium tetraborate). Using these components, you can easily and easily make an interesting toy at home.

Sodium tetraborate gives the composition plasticity; in combination with glue, it acts as a base for any other additional components. Most often, the formulation includes one of the following types of adhesive base:

• PVA;

• silicate glue;

• glue stick;

• "Titanium".

In most cases, children make slimes from office glue or PVA. These formulations do not have a chemical odor and do not contain harmful substances. Rubber glue and "Titan" emit harmful vapors, therefore they can harm the child.

To create a transparent slime, silicate glue is used. If desired, add foam balls, glitter or dye there. Visually, such a toy evokes associations with flowing glass, beautifully flowing from one hand to another.PVA glue makes slimes dull, toys made from it resemble butter. And if you combine it with shaving foam, you get a crunchy gum for your hands.

We draw your attention to the fact that when preparing slimes, you have to come into contact with adhesives, which are not always harmless. Therefore, the whole process should take place in latex gloves, in a ventilated room and always under the supervision of adults. Do not let children taste the ingredients of the slime and avoid contact with eyes - if this happens, rinse with copious amounts of water.

Well, now let's get down to business - let's dwell on the simplest, and at the same time, unusual options for a slime made of borax and glue.

The easiest way is to use office glue. To do this, take 35-40 g of glue base, pour it into a glass container, add a little water and mix thoroughly. In another container, the borax is diluted with water, mixed and both liquids are combined. The resulting mass should be kneaded and kneaded until it acquires elasticity. This slime turns out to be colorless, if desired, you can add any dye to it.

A wide variety of slimes can be made from sodium tetraborate, PVA glue and some additional components. Here are just some of the recipes.

This recipe is used to create a slime that resembles a store product. To prepare it, mix 40 g of glue and half a teaspoon of borax. Pour half a glass of water into one bowl and dissolve the glue base in it, if desired, the resulting mixture can be tinted with any food coloring. In another container, water is diluted with tetraborate.

After that, the liquid with glue is poured into the tetraborate in a thin stream.

An unusual toy based on PVA glue and tetraborate - its difference from all other products is that it reaches for a magnet. To make such a slime, it is necessary to dilute the borax powder in a glass of water until it is completely dissolved so that there are no lumps. In another dish, dissolve 30-40 g of borax in 100 ml of water, and add glue in a thin stream, stirring constantly until optimal density is obtained. Iron oxide powder is added to the finished substance, and mixed again. If you bring a magnet to such a slime, then the slime will very quickly reach for it.

Borax, PVA and regular shaving foam can be used to make a tough yet crisp slime. To do this, pour 50 ml of water into one bowl, add 0.5 tsp. liquid borax, add a glass of shaving foam and PVA. In another container, borax is dissolved in water and another 2 tsp is introduced. borax, after which the tetraborate is slowly added to the container with glue until the optimum consistency is obtained. The mass is thoroughly mixed and kneaded, the finished product should be homogeneous.

If you add plasticine to the mass made of borax and PVA glue, then the slime will resemble butter. It can even be smeared with a knife - hardly anyone from the outside will understand that this is an absolutely inedible product.

To make such an unusual toy, 120 g of glue is mixed with a package of shaving foam, 20 g of liquid soap or hand cream, as well as any dye, are added. In another container, water is diluted with borax and the resulting composition is added in small portions to the glue base until the slime becomes fluid. Mix the compositions of PVA and tetraborate with plasticine and knead until a homogeneous substance is obtained.

The main advantage of slimes made of borax and PVA glue is their durability. These slimes can be kept in the refrigerator for several weeks.

From wallpaper glue, you can rather make chewing gum for your hands. Such a product does not stretch very well, but it wrinkles pleasantly in the hands - this is an ideal anti-stress. For manufacturing, you will need 1 tbsp. l. dry glue, 50 ml of water and a little tetraborate.

Water is poured into one container, dye is added and wallpaper glue is introduced. In one go, pour no more than a quarter of a tablespoon of the powder - each next portion can be added only after thoroughly stirring the previous one. In another container, bred 2 tbsp. l. tetraborate in 50 ml of water and mix with glue. The resulting mass is kneaded with hands for 5 minutes and left for half an hour to thicken.

This is a basic recipe. The base can be stored in the refrigerator in a tightly closed container for 10 days. If desired, glitter and dye can be added to the composition.

A good slime is obtained from Titan glue or any other construction glue. The main thing is that it is waterproof. It is very simple to make it, for this, 2 parts of shower gel or shampoo are poured into the bag and mixed with 3 parts of the glue base, closed in a zip bag and shaken vigorously. After a quarter of an hour, the toy will be ready. If the mass is not plastic enough, you can add a little borax to it.

In the arsenal of every student there will probably be a glue stick, which can also be used to create interesting slimes. To do this, the rod must be removed from the plastic packaging and melted in the microwave or in a water bath. After that, a little borax dissolved in water is added to the resulting liquid mass and mixed thoroughly.

Recipes for making slimes based on glue and tetraborate do not require special knowledge, and slimes are obtained the first time.

According to the reviews of experienced slimers, the best quality products can be obtained from the Luch PVA glue, Titan glue or transparent office glue. It must be fresh, no lumps are allowed. When buying, be sure to make sure that the glue has not expired. If he lay on the shelf for too long at home, then the toy most likely will not work.

The same applies to borax - before buying, be sure to check the expiration date of the drug. It is very important to keep the proportions. It is not necessary to dilute borax in a large volume of water, it must be added literally drop by drop, constantly stirring and observing the consistency of the sticky mass.

If the slime turns out to be too liquid, then Teymurov's gel, liquid for storing lenses, washing powder or starch can save it. They replace low-quality borax and act as a thickener. If the composition still does not thicken, try adding some film mask.

Avoid excess tetraborate. If there is too much borax, the glue will be caught in flakes, or the mixture will be too hard. To remedy the situation, you need to introduce a little liquid soap and water into the mass, they will liquefy the mucus.

There are many recipes to diversify your slime designs.

This technique makes it possible to create a three-color toy that resembles a cosmic picture. To create a slime, take 360 ​​g of silicate glue and pour it in equal parts into three cups. Blue and black colors are added to one, light pink to the second, and purple to the rest. Pour a little glitter into each cup and mix thoroughly.

In the fourth dish, 1 tbsp. l. borax are bred in 2 tbsp. l. heated water, distribute the solution in containers with glue, then mix thoroughly. Ready slimes are connected together and kneaded thoroughly with your hands. Such a mass will resemble the colorful tides of the evening shades of the sky.

In this case, you will need a jar of nail polish - it is combined with 40 g of glue and 30 ml of water is added, after which an aqueous solution of borax is injected in droplets until the optimum density. Knead the slime with your hands until it stops sticking. Such a toy turns out to be very beautiful.

The easiest way to decorate a slime is to simply add glitter to it. The finished product turns out to be elegant, sparkling and truly festive. However, you need to use this decor as carefully as possible, otherwise your hands, desk and all surfaces around will begin to sparkle. Glitter can be purchased at any stationery store or in the hair and nail design department.

Most kids love making slimes with their own hands. However, few people know how to store them and take care of their new toy. Meanwhile, improper care leads to a quick drying out of the slime, after which it remains only to throw it away.

In order for him to delight your baby for a long time, he needs:

• sealed container for storage in the refrigerator;

• regular games;

• proper care.

The shelf life of slimes usually does not exceed 1 month. Store-bought ones last a little longer, home-made ones - a little less. They are best stored in airtight zip bags or tightly sealed jars.

If the room is too hot, then the slime will begin to spread and quickly lose its viscousness and elasticity. Therefore, it is best to place it in the refrigerator. We draw your attention to the fact that it is in the refrigerator, and not in the freezer - in the cold the slime will freeze, shrink and be covered with a crust of ice.

In order for the slime to retain its properties as long as possible, you need to play with it at least once every 3-4 days. If the toy gets dirty, pour some water into the bowl and rinse the product in it. If you notice that the slime has started to shrink, most likely it has lost its moisture. You can feed it with an aqueous saline solution.

Overall, making a slime is a good way to keep your child entertained.

A simple slime recipe in the video below.