Bathroom faucets

Features and selection of bathroom faucet with swivel spout

Features and selection of bathroom faucet with swivel spout
Content
  1. Features and device
  2. Views
  3. Operating tips
  4. Selection rules

The faucet with swivel spout is the perfect solution for a bathroom where the bathtub is adjacent to the sink. In this case, it is possible to do with only one tap for the whole room. Let us consider in more detail all the nuances of the selection of a rotary structure.

Features and device

This is the most convenient type of spout, even for one sink bowl. Typically, the rotation angle of the device is 120-140 degrees, there are models with 180 degree rotation. Most often, swivel faucets with a long spout are found - this is the type that will be convenient for the bathroom and sink.... This type of device will save money, because you do not need to buy an additional tap for the washbasin.

However, the pivot option also has its drawbacks. So, during use, frequent pivoting actions weaken the connecting mechanisms, therefore such a device requires periodic repairs.

Views

Embedded

The built-in faucet often has a low spout, there are not so many among the models of swivel mechanisms, but usually these are very durable products that can save space. There are built-in mixers with one handle, which are easy to operate and quite maintainable, however, they often have to update the O-rings. Another option for a built-in mixer - tap with thermostat... This interesting model automatically controls the flow and pressure of water, and its main drawback is its high price.

On Board

This swivel spout fits onto the rim of the bathroom. These are always long and comfortable constructions. Basically, there are models made of brass and bronze, stainless steel is also often found. Many products are covered with a chrome-nickel material, making it easy to care for such a piece, lime is cleaned quickly and easily.

Operating tips

If a faucet with a swivel spout is mounted on a wall, then place it about 20-30 cm from the edge of the bathroom. When choosing the length of the spout, make sure that the flow does not fall on the side, but rather into the bath.

If the bathtub has a complex design, then it is recommended to choose the method of attaching the device to the edge.

Usually, such baths already have slots for mounting a tap, but if necessary, they can be made independently.

The main recommendations for using a slewing crane are to avoid unnecessary use. That is, it is not worth turning the mixer once again, if this is not necessary, otherwise the mechanism will quickly become unusable and "loosen up". While pivoting structures are usually easy to repair, you shouldn't use tools often. In order not to wipe the constantly wet floor, on which drops settle when you turn the mixer from the bathroom to the sink and vice versa, turn off the water before turning the tap. It will take a few seconds, but the floor will always be dry.

To make the tap look aesthetically pleasing in the bathroom, look after him. The specificity of care depends on the type of material. Usually, only water, a sponge, and napkins are required for cleaning. Microfiber fabric works well, its structure does not scratch the surface of the product. Wipe the tap dry after each wash. For a more thorough cleaning, use special products that gently eliminate dirt, leaving no traces of damage on the coating.

Selection rules

If you choose a faucet on the edge of the bathtub, then pay attention to the push-button switch for the shower. They are usually built into the mixer body. This is a simple and convenient mechanism. An alternative to it can be a cartridge switch. It is presented as a separate element, and its main advantage is the ease of replacement in the event of a breakdown.

As for the material of the mixer, give preference to brass and steel - these are the highest quality and durable products. When buying ceramics, remember that this is a beautiful, but rather brittle material, and the most budgetary silumin has a very short service life. The enameled version is the easiest to care for, which does not leave stains from touching fingers and splashes. But the chrome coating significantly increases the stability and hygiene of the product. When choosing a swivel spout, examine the angle of movement of the specimen and the length of the crane.

The most convenient model - over 30 cm with a wide range.

In the video below you can find a master class on installing a swivel mixer.

no comments

Fashion

the beauty

House