Santek toilets: model overview and selection

The arrangement of the toilet room should be approached with special care. Plumbing is usually installed for a long time, so it must be reliable and of high quality. Among the models of toilet bowls presented on the market, a large share belongs to Russian manufacturers, one of which is Santek.

Santek is one of the most popular domestic brands that produce a full range of sanitary equipment: washbasins, bathtubs, toilets, bidets and urinals. Scope - residential and public spaces. The brand belongs to the large enterprise Keramika LLC from Chuvashia.

The 90s in Russia marked the beginning of the mass emergence of industries that actively adopted the experience of Europe. The Russian government, for its part, introduced the idea of ​​increasing demand for its own goods by reducing the share of imports, and promised support for the most effective projects, one of which was Santek. In 1996, a plant with high-precision equipment was built in Cheboksary. Using advanced technologies, he began the production of ceramic products, which were quite worthy of competition with foreign counterparts.

After a successful start, the company continued to develop and in 2005 opened a second company. And in 2011, it launched the third one, producing hydromassage and acrylic bathtubs. Since 2007, Santek has become part of the international holding Roca Group, which has about 80 enterprises around the world. Roca (Spain) is one of the oldest and most recognized brands of sanitary ware. These investments have allowed the Santek brand to become one of the industry leaders: he twice became the winner of the "Brand No. 1 in Russia" award, which is based on the choice of consumers.

Toilet bowls under the Santek brand are manufactured on a modern German production line equipped with high technologies. The company has strict control over the quality of the glaze, each device is tested for the presence of microcracks, for strict compliance with the specified geometric parameters, for functional suitability. Much attention is paid to the design of products, because even such a utilitarian item can and should be beautiful.

Toilet flush mechanisms are supplied by partners from Portugal (Oliviera) and France (Siamp). The design of the fittings is push-button (push-type), most often with two drain modes. This system allows you to significantly save on water. (very durable, reminiscent of ceramic with antibacterial additives) or cheaper polypropylene round off each set. The budget version is equipped with plastic fasteners, the lid hinges and the Duroplast fastener are made of chrome-plated metal.

If any elements of the headset fail during operation and require replacement, they can always be purchased separately... Spare parts for the entire model range, from the drain button to the tank, are available in stores or to order via the Internet. Santek provides a 5-year finished product warranty.

The range of the brand includes toilets of different sizes, therefore it will not be difficult to find a model even for a limited space. The company's products are reliable sanitary equipment made in accordance with modern international standards, which will satisfy the buyer in terms of price, design and performance.

The classification of toilets is carried out according to such parameters as: method of installation, bowl shape, design and direction of flush, release (outlet to the sewage system).

Santek produces a large assortment of traditional floor standing compact models with an easy installation system. Wall-mounted kits are suitable for small toilets. But the suspended version with the installation of the frame in the wall saves space even more and is also presented in some of the brand's lines.

Flush cisterns can form a single whole with the base and bowl of the toilet (monoblock), they can be mounted separately (on the wall above the toilet) - this outdated option is sometimes used when creating retro interiors. In the compact design, the cistern is attached directly to the toilet on a special shelf.

Toilet bowls are:

• disc-shaped;
• visor - the most common and neat to use;
• funnel-shaped - The formation of splashes and splashes is considered a disadvantage.

The functionality of the equipment is provided by a combination of bowl shape and flushing method. Flush types:

• straight - the flow of water is directed along one side of the bowl, so the entire perimeter is not cleaned;
• circular - water jets are directed at different angles and perfectly cope with dirt, washing the entire inner surface of the bowl.

The division by type of release depends on the location of the inlet sewer, that is, toilets can be:

• with oblique outlet;
• with vertical (to the floor);
• with horizontal.

On sale there are toilets without seats or kits where the models are equipped with them. For greater comfort, the seats are equipped with a microlift that smoothly and quietly lowers and raises the cover.

The choice of models from the manufacturer Santek is quite wide, the types of equipment and technical characteristics are divided into classes: Economy, Standard and Suite... The assortment of the brand includes both the most common and widely used products with an oblique release, as well as devices with a vertical and diagonal.

Cheap models are not inferior to luxury ones in the quality of sanitary ware, but they are equipped with more budgetary components. The "League" uses two-mode fittings, but already from the Russian manufacturer "Inkoer", and the seat is made of polypropylene. In inexpensive toilet bowls "Alkor" and "Pallada", domestic fittings are also used. The available models "Animo", "Rimini" and "Breeze" generally have only one drain mode. The "Rimini" toilet is an excellent choice for combined and small bathrooms, its depth is only 58 cm. All these items are presented in the Economy class.

• "Breeze" - an economical snow-white set with a diagonal (oblique) release, popular among consumers. Dimensions 39x66x71 cm allow you to install the toilet in a fairly tight space. Seat - polypropylene.

• Boreal - the largest collection, which even has a hanging version. The model included in the Standard class is presented in several designs. You can purchase a set with a funnel-shaped bowl, with a poppet and with an anti-splash system.

• "Alcor" available in both economy and standard versions. Even equipped with an anti-splash system, two drain modes and a high-class seat, the standard visor model costs very little, therefore it is in constant demand.

• High (79 cm) luxury toilet from the Austin collection with an oval bowl, it has a horizontal outlet into the wall and a bottom water inlet. Dual-mode drain allows you to save money, a microlift closer is installed on the duroplast seat cover for its smooth lowering.

• Toilet ruler "Caesar" belongs to the Standard class, but is excellently equipped: quick drain in two modes (4 or 6 liters), thin seat from Dino Plast (Italy), soft closing of the lid (Soft Close mechanism). It is a compact with a horizontal outlet and a bowl with a circular shower.

• "Neo light" is a luxury model from the extensive Neo range. This floor construction has a slim duroplast seat with Clip Up micro-lift, oblique release, modern design.

• Versailles - wall-mounted toilet bowl of floor-standing design with oblique outlet, push-down mechanical flush with economy mode. The anti-splash system prevents splashes for increased comfort and hygiene.

When choosing a toilet, you need to consider a number of parameters, otherwise comfortable use will be impossible. Start from the style solution of the toilet room, its dimensions, technological features of plumbing wiring, personal preferences and budgetary options. Should be considered:

• model type - compact or monoblock (the first design is preferable, because a broken tank is easy to replace);
• fastening method - floor installation or suspended version;
• dimensions - it is necessary not only to build on the exact measurements of the room, the distances to the walls or (in the case of a combined bathroom) to the washbasin and bath, but also take into account the height of the seat so that it is comfortable for users of different heights;
• the design of drain fittings and the number of modes;
• type of flush;
• outlet direction (outlet);
• location of the water supply;
• bowl shape;
• material and fasteners of the seat and cover, the presence of an elevator mechanism.

It will be more correct to entrust the installation of the kit to professionals, although it is believed that it is not too complicated for floor structures. Any work with plumbing equipment begins with overlapping the water supply tap... If after this water continues to flow, it means that the shut-off valves need to be replaced. When dismantling old equipment, unscrew the hose from the water supply from the tank and drain the water, and then disconnect the tank.

The next step would be disconnecting the toilet bowl from the sewer (for bolts it is best to use an open-end wrench, and for nuts - an adjustable wrench) and draining the remaining water from it by tilting the bowl.

When installing a new kit first of all, it is necessary to mount the drain mechanism in the tank, and then put a sealing washer on it and fix it with a nut... Then the tank is attached to the shelf of the bowl using bolts and nuts. It is better to attach the toilet to the sewer with a corrugated cuff. It is better to check the connected structure so that there is no leakage. The last step will be connection to the water supply system. For this, the hose is screwed to the tank on one side, and to the pipe on the other.

The ratings of Santek toilets on forums and review sites vary widely - so much so that they are given both 5 stars and only 1 point.

Some users point out that toilet bowl "Boreal" is compact, it has a simple, pretty design... Pleased with the low price. In addition, the anti-splash system turned out to be a pleasant bonus, and the tank is filled almost silently.

Others emphasize the negative aspects of the budget model "Animo": over time, the cistern began to leak at the toilet, the flush level cannot be adjusted, that is, the toilet wastes all the water, which is very uneconomical.

Many people come across defective sanitary ware (tanks with a noticeable curvature and a loose lid), after a while of operation, someone stopped getting water to the end, and they had to change the reinforcement parts. There is often a complaint that you have to wash it off several times. There are conflicting opinions: some write that the water is drawn quite silently, others - the tank is filled with a very loud sound and even shakes.

Even such a trifle as the material of the fasteners of the tank to the base can cause dissatisfaction. The buyer did not like that these bolts were not made of stainless steel, so the water in the tank was colored. This is really unpleasant, we hope that the manufacturer will take into account all the flaws in the future.

In summary, the advantages and disadvantages of Santek toilets can be summarized. Pros:

• compact models;
• laconic but nice design;
• affordable price;
• the toilet is completed with a seat with a lid;
• the seat is easily removable;
• the presence of closers in the seats of some models.

Minuses:

• the anti-splash system sometimes does not function;
• there are uneconomical, outdated models with one drain level;
• the economical drain button also sometimes does not work;
• there are errors in geometry, curvature of the tank and base;
• poor quality flush.

Thus, Santek toilets will be a good purchase when the budget for the purchase of plumbing is very limited. The design of the models is made at a good modern level, the performance is quite high quality. Functionally, this equipment will also provide the necessary comfort, although there is a percentage of defects.

For information on how to choose the right toilet, see the next video.